性能
灵敏度 |
-22 dBmW |
发射功率(最小) |
-8 dBmW |
最大传输距离 |
20000 m |
发射功率(最大) |
-3 dBmW |
联网
以太网的数据传输率 |
10, 100, 1000 Mbit/s |
另外
数据传输率(最大) |
1000 Mbit/s |
以太网路(RJ-45)连接接口数量 |
1 |
连接方式 |
Wired |
OAM/IP Remotely Managed 10/100/1000BASE-T to 1000BASE-X Network Interface Device - 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-BX-D 1490nm TX/1310nm RX Bi-Di single mode (SC) [20 km/12.4 mi.], North America
The xBFFG family of Network Interface Devices (NIDs) is a remotely managed product that offers IP or IP-Less management methods for secure delivery of Ethernet services for business and mobile backhaul applications. With MEF 9 & 14 certification the xFBRM family ensures you are compliant with the latest standards. The xBFFG is a 10/100/1000Mbps product with advance features including – IEEE 802.3ah Link OAM, VLAN, QoS, Bandwidth Allocation and jumbo frame support.
- 10K Jumbo Frame Support
- MEF 9 & MEF 14 Carrier
- Ethernet Certification
- Two selectable remote management modes:
- IP-Based remote management
- In-Band OAM 802.3ah(remote device managed by local peer)
- SNMP
- AutoCross™
- Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
- Auto-Negotiation
- Pause (IEEE 802.3xy)
- Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
- Transparent Link Pass Through
- Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port—thus notifying the end device—while maintaining the fiber link between the two converters.
- Far End Fault (FEF)
- A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
- Remote Loopback
- This feature puts a converter in a special mode that enables the device to loop back the signal from the RX port to the TX port on either media for testing and troubleshooting purposes.
- Non-Intrusive Echo
- IEEE 802.1p™ QOS packet classification with
- 4 egress queues
- Ipv4 IP TOS and DiffServ QOS classification, IPv6
- Traffic class
- IEEE 802.1q™ VLAN, 4096 entries
- Static MAC, 64 entries
- Double VLAN tagging (QinQ)
- VLAN Tunneling
- IEEE 802.1x™ Port based security
- RADIUS client
- RMON counters for each port
- Bandwidth allocation per port
- DMI Optical Management
- USB port for basic setup
- Cable diagnostic function for TP ports
- 8K MAC addresses
- Remote Firmware Upgrade