性能
灵敏度 |
-32 dBmW |
发射功率(最小) |
-13 dBmW |
最大传输距离 |
20000 m |
光纤模式结构 |
Single-mode |
发射功率(最大) |
-6 dBmW |
波长 |
1310 nm |
链路预算 |
19 dB |
能量控制
输入电压 |
100-240 V |
输入电流 |
1 A |
外接电源转接器 |
Y |
另外
以太网路(RJ-45)连接接口数量 |
1 |
连接方式 |
Wired |
数据传输率(最大) |
100 Mbit/s |
10/100BASE-TX, RJ-45 to 100BASE-BX-U, 1310nm TX/1550nm RX, Bi- Di, single mode, SC (DMI model)
The xFBRM family of Network Interface Devices (NIDs) is a remotely managed product that offers IP or IP-Less management methods for secure delivery of Ethernet services for business and mobile backhaul applications. With MEF 9 & 14 certification the xFBRM family ensures you are compliant with the latest standards. The xFBRM is a 10/100Mbps product with advance features including – IEEE 802.3ah Link OAM, VLAN, QoS, and Bandwidth Allocation.
- Two selectable remote management modes:
• IP-Based remote management
• In-Band OAM 802.3ah (remote device managed by local peer)
- SNMP v1, v2*
*Future firmware upgrade; Please contact Transition Networks for upgrade availability.
- AutoCross - Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
- Auto-Negotiation (802.3u) - Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
- Pause (IEEE 802.3xy) - Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
- Transparent Link Pass Through - Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port—thus notifying the end device—while maintaining the fiber link between the two converters.
- Far End Fault (FEF) - A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
- Remote Loopback - This feature puts a converter in a special mode that enables the device to loop back the signal from the RX port to the TX port on either media for testing and troubleshooting purposes.
- IEEE 802.1p™ QOS packet classification with 4 egress queues
- Ipv4 IP TOS and DiffServ QOS classification, IPv6 Traffic class
- IEEE 802.1q™ VLAN, 4096 entries
- Static MAC, 64 entries
- Double VLAN tagging (QinQ)
- IEEE 802.1x™ Port based security
- RADIUS client
- RMON counters for each port
- Bandwidth Allocation (per port) - An important feature found on select converters which allows network administrators to set the bandwidth of the converter to 64KB increments via SNMP management.
- DMI Optical Management
- IPv4 IGMP v1/v2 snooping
- USB port for basic setup
- Cable diagnostic function for TP ports
- 8K MAC addresses
- Remote Firmware Upgrade