能量控制
| 接受频率 |
47/63 Hz |
| 输入电压 |
100-240 V |
性能
| 波长 |
1310 nm |
| 接收功率（最大） |
10.5 dBmW |
| 接收功率（最小） |
-20 dBmW |
| 链路预算 |
10.50 dB |
| 发射功率（最小） |
-9.5 dBmW |
| 最大传输距离 |
10000 m |
| 光纤模式结构 |
Single-mode |
| 发射功率（最大） |
-3 dBmW |
联网
| 双机热备系统 |
Full |
| 以太网的数据传输率 |
10, 100, 1000 Mbit/s |
另外
| 以太网路(RJ-45)连接接口数量 |
1 |
| 连接方式 |
Wired |
| 数据传输率（最大） |
1000 Mbit/s |
10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, 1 x RJ-45, 1 x LC, SM, 10 km max, PoE+
The SGPAT10xx-100 is a 10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, which allows two different types of network segments to be connected easily and affordably while also injecting PoE+ power through the copper RJ-45 port. PoE allows for the transmission of power over the same copper cables used to transmit data. PoE+ media converters are Power Sourcing Equipment (PSE). This AC powered media converter combines data received over a fiber optic link with 56VDC power to provide power and data to Powered Devices (PD) over unshielded twisted pair cabling while complying with IEEE802.3at PoE+ and also backwards compatible with IEEEE802.3af standard PoE.
The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection, and fault protection input. Link Pass Through and Remote Fault Detect allows the media converter to monitor
both the fiber and the copper ports for the loss of a receive (RX) signal and propagate the
failure on to the end devices.
