Trapeze Networks MP-422B WLAN access point

Trapeze Networks MP-422B WLAN access point

MPN: MP-422B
发送方式:
交货来源:
德国
更新价格... 📣 询问价格 Не поставляется
运输成本:
От

凡购买和价格 (Advertising *)

顶部
в наличии
* Alle Preise inkl. der jeweils geltenden gesetzlichen Mehrwertsteuer, ggfs. zzgl. Versandkosten. Alle Angaben ohne Gewähr. Preisänderungen sind in der Zwischenzeit möglich.

技术特点

顶部

其他功能

支持数据传输率 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6Mbps, 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps
连通的液晶显示器 Y
遵守工业标准 IEEE 802.11a, IEEE 802.11b, IEEE 802.11g

端口 & 界面

布线技术 10Base-T, 100Base-TX
DC-IN插口 N

性能

2.4 GHz Y
用户数量 500 user(s)
频段 2.4 - 2.484, 5 - 5.85 GHz
以太网的数据传输率 10, 100 Mbit/s

天线

天线增益水平(最大值) 23 dBi

能量控制

支持以太网(PoE) Y

另外

数据传输率(最大) 54 Mbit/s
以太网路(RJ-45)连接接口数量 2
MP-422B, 802.11a(5 GHz), 802.11b/g(2.4 GHz), WEP, 128bit WEP, WPA, white 802.11a/b/g dual-radio indoor access point designed for entry-level deployments with high-performance requirements.

The MP-422B is an indoor access point that provides extended coverage for 802.11a/b/g wireless LANs. It has dual radios (802.11a and 802.11b/g) featuring dual diversity antennas on both 2.4 GHz and 5 GHz bands. The MP features two 10/100 Fast Ethernet ports for redundant connectivity and 802.3af Power-over-Ethernet (PoE). Its enclosure intentionally resembles a smoke detector to minimize visibility. With no obvious hallmarks of an access point, the MP-422B is less likely to be tampered with, but also features a built-in Kensington lock system for added physical security.

The MP-422B is simple to deploy, easy to manage, and supports any kind of service—data, voice and video—over Wi-Fi, automatically calculating the data integrity and RF signal strength of the wireless channel and continually tuning for optimal RF channel and transmit power, while enforcing the prioritization of delay-sensitive voice and other critical applications. Wi-Fi Multimedia (WMM) or SpectraLink Voice Priority (SVP) can be configured to ensure optimal QoS for voice traffic. Policies allow per user, protocol, or class-of-service (CoS) mapping.

In addition to traditional access point functionality, the MP-422B can also serve as Mesh AP, Mesh Portal, or WDS Bridge to extend the reach of enterprise WLANs. Furthermore, the MP-422B can support such functionality in either point-to-point or point-to-multipoint topologies, allowing maximum flexibility within a mesh or bridged environment. In mesh portal mode, the MP-422B acts as the gateway node to the wired network, advertises services to mesh access point nodes, and enforces firewall, access and quality of service (QoS) policy, simultaneously performing broadcast suppression—all of which serve to optimize RF spectrum utilization in the mesh. The MP-422B can be configured with one radio for client services and the other for mesh service.

The MP-422B plays a key role in rogue and intrusion detection as well as denial-of-service (DoS) attack detection. ActiveScan allows MPs to fulfill a dual role. The system scans all 802. 11 channels, while simultaneously providing wireless connectivity to mobile clients. SentryScan allows MPs or individual MP radios to act as dedicated sentries, providing nonstop scanning.

The MP-422B also supports location-based service applications that rely on Wi-Fi signal information for position location. Common usages include asset tracking or client location.
Фотографии

    密码恢复
    要恢复您的密码,请在下面您的电子邮件地址框与您已注册请输入:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    发生了错误。请检查您的电子邮件地址,然后再试一次。
    Ваш новый пароль:

    名称为空


    Выберите страну доставки

    您还没有写消息

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    已发送您的消息!

    親密

    1
    产品目录
    取消
    Бренды:
      Выберите бренды
        查看更多
          地區搜索
          全球
          Категории
            产品名称