端口 & 界面
布线技术 |
10Base-T, 100Base-TX, 1000Base-TX |
DC-IN插口 |
Y |
其他功能
连通的液晶显示器 |
Y |
遵守工业标准 |
IEEE 802.11a/n, IEEE 802.11b/g/n |
性能
2.4 GHz |
Y |
用户数量 |
500 user(s) |
频段 |
2.4 - 2.484, 5 - 5.85 GHz |
另外
数据传输率(最大) |
54 Mbit/s |
以太网路(RJ-45)连接接口数量 |
1 |
MP-632, 802.11a/n(5GHz), 802.11b/g/n(2.4GHz), Gigabit Ethernet, white
Mobility Point MP-632
The Trapeze Networks outdoor MP-632 is a high speed dual radio 802.11n (3 x 3) Multiple Input / Multiple Output (MIMO), outdoor access point. It has maximum aggregate data rates of up to 600 Mbps and features 10/100/1000 Gigabit Ethernet connectivity and a dedicated 48VDC power port.
The MP-632 comes in a ruggedized, weatherproof enclosure suitable for extreme outdoor environments. It complies with NEMA4X and IP67 standards for corrosion resistance and features built-in lightning protection for antenna ports, as well as surge protection for Ethernetand power ports. It also has automatic thermal management inside the access point and includes RSSI meter functions on LEDs for easy antenna alignment in the field.
The MP-632 complements other Trapeze Networks’ indoor and outdoor access points by delivering the same rich enterprise class feature set, with the same operations model, outdoors.
With Smart Mobile technology, WLAN coverage and secure mobility can now be extended across the campus, enabling wireless users to stay connected as they roam from building to building.
In addition to traditional access point functionality, the MP-632 can also serve as high speed Mesh AP, Mesh Portal, or WDS Bridge to extend the reach of enterprise WLANs. Furthermore, the MP-632 can support such functionality in either point-to-point or point-to-multipoint topologies, allowing maximum flexibility within a mesh or bridged environment. In mesh portal mode, the MP-632 acts as the gateway node to the wired network, advertises services to mesh access point nodes, and enforces firewall, access and quality of service (QoS) policy, simultaneously performing broadcast suppression—all of which serve to optimize RF spectrum utilization in the mesh.
The MP-632 can be configured with one radio for client services and the other for wireless backhaul or mesh service, or in any hybrid combination desired in either the 2.4 GHz or 5 GHzbands. A variety of external antenna options ensure that the RF coverage area can be tailored to meet access requirements including long distances.
Smart Mobile intelligent switching is supported in all mesh modes, enabling each mesh node to provide the shortest, least congested path to the destination over encrypted secure mesh links. The MP-632 can also be used in a dedicated bridging mode, to provide seamless connectivity between buildings without the expense of laying new cable.