内容包装
| 用户手册 |
Y |
| 包含电缆 |
AC, USB, eSATA |
磁盘驱动器
| 可支持的存储驱动器数量 |
2.5, 3.5 " |
| 可支持的存储驱动器数量 |
4 |
| 存储驱动器接口 |
Serial ATA |
| 最大存储容量 |
6 TB |
| 存储介质类型 |
HDD, SSD |
端口 & 界面
| 主机接口 |
USB 3.0 (3.1 Gen 1) Type-B |
能量控制
| 输出电压 |
12 V |
| 交流电（AC）输入电压 |
100-240 V |
| 交流电（AC）输入频率 |
50/60 Hz |
| 输入电流 |
1.2 A |
| 输出电流 |
5 A |
4-Bay USB 3.0/eSATA to SATA Docking Station with Cloning, 6.35 cm (2.5 ") . to 3.5 in. SATA Hard Drives
Connects up to four 2.5 in. or 3.5 in. SATA HDD or SSD to your laptop or computer’s USB or eSATA port for extra storage, quick disk formatting and fast data transfer.
- Supports USB 3.0 data transfer rates up to 5 Gbps
- Supports eSATA data transfer rates up to 6 Gbps
- Compatible with SATA HDDs and SSDs up to 6 TB
- Works with all USB/eSATA-enabled operating systems
- Offline cloning requires no computer connection
The U339-004 4-Bay USB 3.0/eSATA to SATA Docking Station connects up to four 2.5- or 3.5-inch SATA hard disk drives (HDD) or solid state drives (SSD) to an available USB or eSATA port on your laptop or computer. This lets you back up important data, retrieve data from an old hard drive, or store information on an external drive that you can take with you to another computer.
Not only can you quickly access hard drive content without time-consuming internal installation, you can also clone a drive to as many as three others simultaneously. Cloning does not require the U339-004 to be connected to a host computer. Just insert the master drive into the master bay, insert the slave drive(s) into the slave bay(s), and press the Clone button twice. Red LEDs monitor cloning progress. The U339-004 accepts 2.5- and 3.5-inch SATA III, II and I hard drives up to 6 TB and will work with larger drives as they become available.
This docking station supports USB 3.0 data transfer rates up to 5 Gbps, as well as eSATA rates up to 6 Gbps. Its UASP (USB Attached SCSI Protocol) feature reduces latency and allows the cable to perform up to 70% faster when connected to a UASP-enabled host controller.
The U339-004 requires no software or drivers. It’s compatible with all USB- and/or eSATA-enabled operating systems and backward-compatible with previous USB generations.
- Connects Up to 4 SATA Drives to Your Computer’s USB or eSATA Port
- Recommended for backing up, retrieving and storing large data files
- Supports USB 3.0 data transfer rates up to 5 Gbps
- Supports eSATA data transfer rates up to 6 Gbps
- Features UASP for performance up to 70% faster when connected to UASP-enabled host controller
Provides Offline Disk Cloning
- Duplicates a hard drive on up to 3 others simultaneously
- Offline cloning requires no computer connection
- Compatible with 2.5 in. and 3.5 in. SATA HDDs and SSDs Up to 6 TB
- Accepts SATA III, SATA II and SATA I drives
- Backward-compatible with previous USB generations
- Will work with larger SATA drives as they become available
- Easy to Use
- Plug-and-play—no software or drivers
- No time-consuming internal installation required
- Compatible with all USB- and/or eSATA-enabled operating systems
- USB 3.0 and eSATA cables included
