端口 & 界面
| 输出接口 |
2 x RGB/YPbPr, UTP |
| 主机接口 |
2 x CV, 2 x YC (S-Video), YUV/YPbPr |
能量控制
| 工作电压 |
12 V |
| 工作电流 |
1 A |
| 外接电源转接器 |
Y |
2 x CV, 2 xYC (S-Video), YUV/YPbPr / 2 x RGB or YPbPr, UTP
C2-1200 Video Scaler is based on TV One's exclusive CORIO2™ technology and provides high quality up conversion from standard video formats to Computer or HDTV signals. NTSC and PAL video standards are supported. Video Inputs are 2x Composite, 2x S-Video or one YUV Component or YPbPr. A computer bypass is also provided. The output is selectable as any computer resolution up to 2048x2048 at any vertical refresh rate and all HDTV resolutions up to 1080p. A wide variety of computer signal formats are available to support PC, Mac and Workstation formats.
A unique feature of this unit is the UTP output that supports RGB or YPbPr outputs up to 300 meters (1,000’), to allow integration into existing wiring structures. UTP receivers are optional.
All the functions can be controlled via the front panel Push Buttons, an Infrared Control Remote Unit or via an RS-232 connection. A Windows Control Panel is provided and most third party control systems interface directly with the entire C2 range of products. An On-Screen Display is available to assist in setup.
Variable Zoom to 10X allows you to enlarge any part of the video image to fill the entire computer screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The full bandwidth chroma sampling insures faithfully reproduced, high resolution colors.
A 4x1 integral stereo audio routing switcher provides unbalanced inputs and output to follow the video input selection. A rear panel terminal block provides access. The C2-1200 is housed in a desktop case and a rackmount kit is available as an option.
