环境条件
| 运行温度范围（T - T） |
-4 - 113 °F |
能量控制
| 输出功率 |
15.4 W |
| 以太网（PoE）供电总功率概算 |
15.4 W |
| 支持以太网（PoE）电源供应 |
48 V |
联网
| 双机热备系统 |
Half, Full |
| 以太网的数据传输率 |
10, 100 Mbit/s |
| 支持以太网（PoE） |
Y |
48 DC, IEEE 802.3af, 3 A, 1.7 kg
<b>Portable POE Injector Battery Pack for IP Cameras</b>
Veracity's POINTSOURCE is a rechargeable battery-powered Power over Ethernet (POE) injector, especially designed to enable security installers to install, setup, test or demonstrate IP cameras in an installation, even if no network or power connection is available.
POINTSOURCE features PINPOINT-style integrated network crossover, to allow direct connection of a laptop. It supports all classes of 802.3af POE device, and also includes a 12 volt power output for auxilliary equipment.
- Allows local viewing of IP camera images on laptop/netbook close to camera
- Enables rapid and precise adjustment of lens focus and viewing angle
- Includes a 12 volt power output for auxiliary equipment
- Battery capacity sufficient for typical full day’s installation work
- POINTSOURCE supports all classes of 802.3af POE device
- Installs in seconds – removes in seconds - reduces time on site
<b>Portable, rechargeable, power where you need it </b>
Veracity’s POINTSOURCE is a portable, rechargeable battery - powered POE (Power over Ethernet) injector. It is designed for field use, being compact and easy to handle, with a useful shoulder strap, which leaves your hands free. It can deliver enough power to support a full day’s IP camera installation work. POINTSOURCE provides a similar functionality to Veracity’s PINPOINT, but includes a built-in POE power source to allow installation and set-up of IP cameras before POE power is available through the network. POINTSOURCE can be used with all IEEE 802.3af POE compatible equipment, including IP cameras, Wireless Access Points, VOIP phones and POE-powered Access Control devices.
<b>On Site configuration</b>
The primary application for POINTSOURCE is the in-situ configuration, set-up and fine adjustment of IP cameras on an installation site. By connecting a laptop or netbook to the IP camera through POINTSOURCE, all aspects of the camera image (focus, direction, aperture, zoom, resolution, compression etc.) can easily be viewed or adjusted.
<b>Site surveys and pre-installation trials</b>
POINTSOURCE allows the rapid set-up of an IP camera during site-surveys, allowing the integrator to capture snapshots or video clips of the actual on-site scenes for presentation to the prospective end-user. This is an effective example of when a “picture paints a thousand words”.
<b>Customer demonstrations can be done anywhere</b>
Any new IP camera can very quickly be demonstrated to a client or consultant using just the camera, a laptop and the POINTSOURCE package. No external power or additional cabling is required, allowing demonstrations to be done anywhere, from a café tabletop to a desert road.
<b>Mobile and temporary installations</b>
A POINTSOURCE and IP camera with SD-card slot are all that’s required for a very compact and easily transported temporary surveillance recording system.
