扬声器
| 放大器 |
N |
| 低音炮 |
Y |
| Subwoofer driver diameter (imperial) |
8 " |
| 低音炮 寸法 |
6.5 " |
| 高频扬声器直径 |
1 " |
| 扬声器数量 |
2 |
| 驱动程序数量 |
2 |
| 高频扬声器 |
Y |
| Woofer diameter |
165 mm |
| Tweeter diameter |
25.4 mm |
| Driver diameter |
202 mm |
| 推荐使用 |
Other |
音频
| 灵敏度 |
89 dB |
| 频率范围 |
80 - 20000 Hz |
| 阻抗 |
8 Ω |
80 - 20000Hz, 8Ohm, 16.51 cm (6.5 ") 2-Way, 89dB, 3.2kg, White
The CS-1300 ceiling speakers feature a two-way design offers a full-bandwidth delivery full of control and clarity. The main driver is a 6.5″ polypropylene cone, complimented by a ferro-fluid cooled silk tweeter set in a swivel mount for fine tuning of the stereoscopic image. These low impedance speakers don’t sacrifice frequency range in the way that the transformer on 100/70v speakers inherently do, meaning lower bass extension and higher treble without distortion. These speakers are a perfect alternative for situations where wall speakers are not appropriate.
High Sound Pressure Levels
When ceiling speakers mount into plenum space the ceiling acts as an infinite baffle. The net result is it’s harder to use the volume of air behind the speaker to reinforce the sound coming out the front - which is what a bass reflex does in traditional chassis speakers. Because of this ceiling speakers inherently lack power at the bottom end, so we’ve tuned these to have a slightly louder sensitivity of 89dB to punch through high-noise environments.
Simple to fit
Simple to mount into false ceiling tiles, the CS-1300 is the audio contractor’s ultimate product for ease of installation. Get a 210mm hole-saw (such as a Starrett STRHS210 with an arbor), drill a hole, and fit the speaker! It’s clean and easy.
Tune to the environment
The passive crossover provides the new CS1300 with superb off-axis dispersion characteristics, and the contemporary grille design makes the finished installation less intrusive than others in its class. Best of all the CS-1300 has been tuned to compliment all the Vision amplifiers.
