扬声器
| 低音炮 |
Y |
| 低音炮 寸法 |
4 " |
| 高频扬声器直径 |
1.5 " |
| 扬声器置放位置 |
Ceiling-mountable |
| 驱动程序数量 |
2 |
| 扬声器数量 |
2 |
| 放大器 |
Built-in |
| 高频扬声器 |
Y |
| 扬声器位置 |
Front |
| 推荐使用 |
PC |
音频
| 灵敏度 |
89 dB |
| 频率范围 |
80 - 20000 Hz |
| 阻抗 |
8 Ω |
2x30W, wired input, Buetooth, ine-eve output, IR remote
The CS-1600P are based on Vision’s passive ceiling loudspeakers but have a powerful 60 watt amplifier built in to eliminate the need for an external amplifier. They are suited to meeting rooms and classrooms where a discrete audio solution is required.
CS-1600P rearBluetooth 4.0
Connect directly from your phone or laptop wirelessly. When Bluetooth is activated either by turning them on or selecting “Bluetooth” on the remote control, the loudspeakers will search for Bluetooth devices for ten minutes and automatically switch from the cabled input when a device connects. When the bluetooth device is disconnected the loudspeakers automatically switch back to the line-level input. (NB: implementation of Bluetooth drivers on Windows computers is variable so they don’t always work)
Remote Control
A full range of options are presented on the IR remote control, including bass and treble adjustment.
Master/Slave
Like Vision’s other powered loudspeakers these are packaged and sold as a pair. The amplifier is housed in the “master” loudspeaker which has the connection panel, and there is a speaker output which connects to the passive “slave” loudspeaker.
Digital
The CS-1600P uses a class-D digital amplifier chip which uses no power at rest unlike analogue amplifiers, and consumes very little power when in use. They are assembled on semi-automated production lines to ensure consistency and reliability.
Audio Output
If you require two pairs for the room an audio output allows you to pass the audio signal on to a second pair of CS-1600P. In fact you can daisy-chain as many pairs as you need using this line-level audio output.
RS-232
To assist with integration into a fully controlled audio-visual environment these loudspeakers can be controlled with RS-232 (serial) codes.
Memory
When power is connected the CS-1600P automatically turns on and remembers the previous input and volume setting. Restoring power brings the loudspeakers back to life automatically.
Metal Backcan
To satisfy strict fire safety regulations in some countries the CS-1600P have a sheet-metal back-can which enhances Electro-Magnetic Compatibility (EMC) and reduces heat transfer.
2-Way Drivers
These loudspeakers feature a two-way woofer and tweeter design which sounds great in presentation or teaching environments.
Auto-Standby
If the amplifier senses no input it will automatically go into standby mode. As soon as you press play on your source device it will automatically switch on again.
