音箱棒音
| 低音炮 寸法 |
2 " |
| 高频扬声器直径 |
1 " |
| 高音喇叭驱动器数量 |
2 |
| 音箱棒RMS功率 |
30 W |
| 低音单元驱动器数量 |
4 |
| 阻抗 |
4 Ω |
其他功能
| 音箱棒尺寸（宽x深x高） |
1000 x 85 x 85 mm |
技术细节
| 手持式遥控器 |
Y |
| 频率范围 |
150 - 20000 Hz |
| 墙壁支架 |
Y |
SP-2000P - 30W, 4x2″, 2x1″, 150Hz-20kHz, 4.1kg
SP-2000P with flat panelWith a powerful 30 watt amplifier built in, the SP-2000P powered soundbar loudspeakers are designed to enhance an interactive flat-panel display. They are simple to install and sound great!
6-Way
Four powerful 2″ broad-band drivers provide the bass and mid-range. The proximity of the drivers provides a coupling effect to extend bass lower than it would normally go with physically small drivers. The woofers are complimented by two 1″ tweeters.
Remote Control
A full range of options are presented on the IR remote control, including bass and treble adjustment. The same remote control comes with Vision’s SP-1200P loudspeakers, and replacement remote controls are available.
Volume Control
SP-2000P rearA dial on the underside of the loudspeaker allows easy access to volume adjustment. A short push on the volume dial changes input, and a long push turns the power on and off.
Installation Brackets
Brackets are included which allow the SP-2000P to share the flat-panel’s VESA mount. The brackets are 450mm long and can be fitted 200, 400, and 600mm apart.
Connectivity
Two audio inputs are available on the rear panel, plus input 2 is duplicated on the underside for fast adhoc connection of portable sources such as phone and tablets. SP-2000P input panelAn external switch-mode power supply is provided with figure-8 (C7) power cables.
Memory
When power is connected the SP-2000P automatically comes on and remembers the previous input and volume setting. Restoring power brings the loudspeakers back to life automatically.
Digital
The SP-2000P uses a quality Yamaha class-D digital amplifier chip. The amplifier circuit is contructed using surface-mount-technology techniques to ensure a long reliable life.
