重量和尺寸
| 接收器深度 |
92 mm |
| 接收器高度 |
23.5 mm |
| 接收器的宽度 |
55 mm |
| 接收器的重量 |
200 g |
| 发射机深度 |
48 mm |
| 发射器的高度 |
21 mm |
| 发射器的宽度 |
55 mm |
端口 & 界面
| RJ-45 端口数量（接收器） |
1 |
| RJ-45 端口数量（发射器） |
1 |
| DC-IN插口 |
Y |
性能
| 最大传输距离 |
150 m |
| 类型 |
Network transmitter & receiver |
| 数据传输速度 |
200 Mbit/s |
TC3 USBTP USB-over-CAT6 Module
The Techconnect USBTP is a USB extender which converts USB to run over a “twisted pair” network cable, allowing flexible placement of the AV faceplate with respect to the interactive flat panel. No drivers are required.
150 metres
Converting the signal to run over a twisted-pair cable – also known commonly as “CAT5” or “Ethernet” – allows the signal to travel up to 100m on CAT5e, or 150m on CAT6. The USB input cable can be up to 5m long, and the output cable can be as long as 10m. Vision recommends high quality Techconnect USB cables.
Modular
As part of the Techconnect family of products it comes with a transmitter in the form of a modified USB-B module. Fix it into place on any Techconnect faceplate.
Powered
A power supply is included which connects to the receiver. For shorter cables this external power may not be necessary, but many interactive display devices only work reliably if they receive full power USB.
Status LED
A new feature on this updated version are two LED lights which help installers trouble-shoot issues. One light confirms connection with the other end, and the other shows data transfer.
Webcam-Ready
As well as interactive whiteboard and flat-panel applications, the Techconnect USBTP can be used for any other USB devices which work on USB 2.0 such as printers and webcams.
Plug and Play
All parts are included in one box. Just install the transmitter module into the faceplate, and mount the receiver at the remote USB device.
