产品特点
Vibration resistant |
Y |
AWG 美国线规导线直径(最大值) |
14 |
Shock resistant |
Y |
AWG 美国线规导线直径(最小值) |
28 |
Wire clamp type |
Cage clamp |
Conductor area (min) |
0.8 mm² |
Conductor area (max) |
1.5 mm² |
Baud rate |
10000 Bd |
Strip length (max) |
6 mm |
能量控制
电流消耗 |
260 mA |
Current consumption (internal) |
350 mA |
Current consumption (field side) |
650 mA |
Fieldbus Coupler CANopen, D-Sub, ECO
<b>Fieldbus Coupler CANopen; D-Sub; ECO </b>
The ECO fieldbus coupler is designed for applications with a reduced scale I/O requirement. Using digital only process data or small amounts of analogs, while retaining all of the choice that’s offered by the Series 750 I/O.
The coupler has an integrated supply terminal for the system voltage. The field power jumper contacts are supplied via a separate supply module.
The CANopen bus coupler is capable of supporting all I/O modules and automatically configures, creating a local process image.
The local process image is divided into two data zones containing the data received and the data to be sent. The process data can be sent via the CANopen fieldbus to the PLC, PC or NC for further processing, and received from the field via CANopen.
The data of the analog modules is stored in the PDOs according to the order in which the modules are connected to the buscoupler. The bits of the digital modules are sent byte by byte and also mapped in the PDOs. If the amount of digital information exceeds 8 bits, the buscoupler automatically starts with a new byte.
All entries of the object dictionary can be mapped ‐ as the user likes ‐ in the 5 Rx PDOs and 5 Tx PDOs.
The complete input and output process image can be transmitted using SDOs.
“Spacer modules“ can be set via software.