产品特点
| Vibration resistant |
Y |
| 发射信号量 |
2 outputs |
| Shock resistant |
Y |
| AWG 美国线规导线直径(最小值) |
28 |
| Wire clamp type |
Cage clamp |
| Internal bit width |
32 bit |
| Switching frequency (max) |
100 kHz |
| Conductor area (min) |
0.08 mm² |
| Conductor area (max) |
2.5 mm² |
| Signal voltage (1) |
15 - 30 V |
| Signal voltage (0) |
-3 - 5 V |
| Fire load |
1.516 MJ |
| AWG 美国线规导线直径(最大值) |
14 |
| 隔离度 |
0.5 kV |
能量控制
| Current consumption (internal) |
70 mA |
Frequency Counter, 24 V
The counter is used for frequency measurement here, with the pulse period of the 24V signal being measured at the CLOCK input and then converted to a frequency value.
Measurement is enabled and inhibited via the GATE input.
Digital outputs DO 1 and DO 2 can be set using the control byte.