产品特点
| Shock resistant |
Y |
| AWG 美国线规导线直径(最小值) |
28 |
| 隔离度 |
0.5 kV |
| Wire clamp type |
Cage clamp |
| Switching frequency (max) |
125 kHz |
| Conductor area (min) |
0.08 mm² |
| Conductor area (max) |
2.5 mm² |
| Strip length (max) |
9 mm |
| Vibration resistant |
Y |
| AWG 美国线规导线直径(最大值) |
14 |
能量控制
| Current consumption (internal) |
20 mA |
SSI transmitter interface, 25 bits, 125 kHz
<b>SSI transmitter interface; 25 bits; 125 kHz; Gray code </b>
This module is an SSI interface for the direct connection to an SSI transmitter.
After the interface has given a clock pulse to the sensor, the interface reads the incoming data and transmits it directly in the form of a data word into the process image of the PLC or PC. It is possible to factory adjust different operating modes, transfer frequencies and bit widths by means of the control register.
The power supply for the transmitter is derived internally from the power jumper contacts.