产品特点
| Switching frequency (max) |
0.5 kHz |
| Conductor area (min) |
0.08 mm² |
| Conductor area (max) |
2.5 mm² |
| Strip length (max) |
9 mm |
| Fire load |
1.23 MJ |
| Vibration resistant |
Y |
| AWG 美国线规导线直径(最大值) |
14 |
| Shock resistant |
Y |
| AWG 美国线规导线直径(最小值) |
28 |
| 频道/通道 数量 |
2 channels |
| 隔离度 |
0.5 kV |
| Wire clamp type |
Cage clamp |
能量控制
| Current consumption (field side) |
8 mA |
| Current consumption (internal) |
10 mA |
2 up/down counter, 16 bits, 500 Hz
<b>2 up/down counter; 16 bits; 500 Hz </b>
The I/O module has two counters that count 24VDC binary pulses independently of one another. The data is then transmitted to the control via the fieldbus.
The counters can be set or reset with the control bytes. A counter lock-out is also possible.
The control bytes also determine the direction of counting.