Wago 750-665/000-001 fieldbus module

Fail-safe 4/4 ch digital in/out, 24 VDC, 0.5 A, PROFIsafe The 750-665/000-001 PROFIsafe Input/Output Module has 4 power outputs (O1 ... O4) and 4 clock sensitive inputs (I1 ... I4) that are fed by 4 differently clocked outputs (T1 ... T4).

Clock outputs are short-circuit-protected. The inputs and outputs are continually monitored for cross circuits and power supply from separate sources.

The associated green LED for each of the four input channels and four output channels indicates the signal state. Two red LEDs also indicate internal or external errors.

The PROFIsafe address can be set using the DIP switch located on the side of the module.

Field and system levels are electrically isolated.

Individual input modules can be arranged in any combination when configuring the fieldbus node. An arrangement in groups is not necessary.

Reference the product manual for further information!

<b>When implementing new installations, please consider WAGO's 750-667/000-003 PROFIsafe V2 iPar 4-Channel Digital Output Safety Module.</b>

<b>Response times (max.) Outputs</b>: ton (L->H) = 13 ms; toff (H->L) = 13 ms; plus 2 x K-bus runtime plus 2 x fieldbus runtime; plus PLC runtime

<b>Response times (min ... max) Inputs</b>: ton (L->H) = 13 ms … 71 ms; toff (H->L) = 13 ms … 26 ms; plus 2 x K-bus runtime plus 2 x fieldbus runtime plus PLC runtime