电池
| Battery type (transmitter) |
AAA |
产品特点
| 适用于智能手机 |
N |
| 接口 |
RF Wireless |
| 最大范围 |
30 m |
重量和尺寸
| 深度 |
34 mm |
| 重量 |
40 g |
| 宽度 |
36 mm |
| 高度 |
85 mm |
Receiver 2.4GHz, 16 Channels, up to 30m, 1/250s, 2x 3V AAA, 50g, Black
receiver 2,4GHz
Wireless receiver for studio flashes The receiver matches the walimex pro radio remote trigger sets for Canon (19944), Nikon (19945) and Sony (19946) and enables triggering of additional flashes with just one transmitter.
- radio receiver for the sets walimex pro radio remote trigger and receiver for Canon (19944), Nikon (19945) and Sony (19946)
- receiver frequency 2.4 GHz
- 16 channels
- compatible to studio flashes with 3.5 mm and 6.3 mm jack bushing
- compatible with system flashes with standard hot shoe
- Operating range up to 30 m - Synchronisation rate 1/250 s
Content
- 1 x walimex pro receiver 2.4 GHz, batteries and Sync cord
Description
Wireless receiver for studio flashes
The receiver matches the walimex pro radio remote trigger sets for Canon (19944), Nikon (19945) and Sony (19946) and enables triggering of additional flashes with just one transmitter. This is connected to the flash in the usual way, via the synch cable. Thanks to the modern 2.4 GHz transmitting frequency and the possibility to set 16 channels, one can use several flash systems besides each other, without interference between each other. Even remote controls and radio communication equipment in the vicinity will not be disturbed. The power supply is provided by conventional AAA-batteries, which you can easily change yourself.
Camera triggering via radio
You can also use the receiver to trigger your camera (Canon, Nikon or Sony) via radio. This is simply accomplished via the trigger on the transmitter. By pressing the trigger button half way down you can focus beforehand. The trigger supports the Bulb-function for long exposure photography, series image function and self-timer. The professionally active hobby photographer is able to trigger his flash or camera, just as desired.
