技术细节
| 音频支持 |
Y |
| 可支持的电缆类型 |
Cat5, Cat5e, Cat6, Cat6a |
| 最大传输距离 |
100 m |
| 类型 |
Console transmitter & receiver |
| 数据传输速度 |
100 Mbit/s |
能量控制
| 接受频率 |
50/60 Hz |
| 电源类型 |
DC |
| 功耗（最大） |
26.5 W |
| 输入电压 |
100 - 240 V |
HDBaseT 2.0 Extender, USB, 4K 100m/328ft, Dual 10/100 Ethernet, 2W Audio
Although WyreStorm have offered 5Play compliance over Class A HDBaseT for some time, the EX-100-4K-PRO takes things a step further with the arrival of HDBaseT 2.0.
An HDMI extender set literally bursting at the seams with features, the EX-100-4K-PRO is one of the first extenders in the world to feature HDBaseT 2.0 specification; HD video, audio, Ethernet, two-way control via IR and Serial and two-way PoH over distances of 100m/328ft for full 4K or 150m/492ft at 1080p along a single Cat6 cable.
Unrivalled power, distance and functionality, the EX-100‐4K-PRO represents the ultimate 4K extender solution supporting UltraHD 4K resolutions at 60Hz with chroma subsampling of up to 4:2:0 offering support for new 4K broadcast standards.
2-way PoH allows either transmitter or receiver to be powered. Both the TX & RX feature dual 10/100 Ethernet ports for connection of up to 3 devices + LAN per extender pair. The addition of USB 2.0 pass-through offers KVM functionality while enabling full data transfer capabilities. Either end may be connected to the host or dual devices and DIP switch management allows for the direction of USB control, long cable mode and firmware updates to the units.
The EX-100-4K‐PRO includes audio embed on transmitter and de-embed on the receiver via 3.5mm jack connectivity. Separate audio feeds can also be directed bi-directionally thanks to an additional two-way S/PDIF audio pass-through that allows digital audio signals to be sent and received at either end.
Supporting the latest 4K standards yet also backwards compatible with HDBaseT 1.0 transmitters or receivers, the EX-100-4K-PRO is ready and primed for the 4K future, yet still compatible with current technology versions for arguably the most powerful and fully-featured HDBaseT extender on the market.
- Featuring HDBaseT 2.0 offering the very latest in single cable transmission technology
- 4K transmission 4096x2160 @60hz 4:2:0 24bit to 100m/328ft
- 1080p transmission 1920x1080p @60Hz 48bit to 150m/492ft
- 5Play compliance supporting the extension of 4K and HD video, HD audio, Ethernet, Control and power along a single Cat6 cable
- Dual USB 2.0 pass-through offering full data transfer capability and KVM functionality with single host and dual device ports on both TX and RX
- Dual 10/100 Ethernet ports on both the TX & RX for connection of up to 3 devices + LAN per extender pair
- Bi-directional S/PDIF to both units sends and receives digital audio signals at either end
- Two-way PoH enables either device to be powered remotely
- DIP Switch selection for direction of USB control, long cable mode and firmware update
- Audio embed on Transmitter and audio de-embed on Receiver via 3.5mm jack connection
- Backwards compatible with HDBaseT 1.0 Transmitters or Receivers
- HDCP compliant
- 3D supported
- Cable termination follows IEEE-568B standards
- LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link.
- Threaded bushings allow use of both standard and locking DC power plugs
- Phoenix port for additional power connection
- Energy efficient universal power supply included
- Mounting brackets included
