WyreStorm RX-70-POH video switch

HDBaseT POH Display Receiver with 2-Way IR Control and RS232 (4K to 35m/114ft, 1080p to 70m/230ft) The RX-70-POH Display Receiver utilizes powerful Class B HDBaseT technology to receive transmissions of uncompressed 4K@60Hz up to 35m/114ft and full 1080p HD video@60Hz/36bit up to 70m/230ft, including HD multichannel audio, 2-way IR control, RS-232 and remote power from compatible transmission devices, such as WyreStorm matrices, transmitters or presentation switchers using a single shielded or unshielded Cat5e/6 cable - all within a low-profile chassis of just 18mm, more than capable of installation behind even the slimmest display wall mounts.

PoH (Power-over-HDBaseT) enables power to be passed along the cable along with transmissions from a POH-enabled transmission device to power receivers at display zones without the need for local mains power for greater flexibility and convenience during installation as well as improved energy efficiency compared to a permanent mains connection.

If local power is required, the RX-70-POH offers additional 12v power connectivity via threaded bushings for both standard or locking DC power plugs and phoenix connector.

Featuring switchable RS-232 for firmware update or matrix control from a display zone, the RX-70-POH also offers LED indication for visual confirmation of unit/transmission operation, including Power, HDCP presence within signal and Status and Link to illustrate correct unit function and signal reception.

Tailor-made for WyreStorm POH matrix and POH presentation switcher applications, the RX-70-POH offers flexibility and reliability combined with innovative features and an ease of use to deliver HD audio and video and power, controlled via IR, RS232, all on a single Cat5e/6 cable that removes the need for additional control, video cables and power supplies on installations, whether in a residential or commercial setting.

All of which guarantees a quick, hassle-free installation, whatever the application, for the very best in reliable and affordable single cable AV distribution and control.

<b>Features</b>

- Display receiver supporting transmissions of 4K and 1080p HD video, HD multichannel audio and control transmissions using single Cat5e/6
- Support 35m/114ft 4K transmission distances up to 4096x2160@30/60Hz 4:2:0
- Supports 70m/230ft HD transmission distances of 1080p, 1080i, 720p with screen refresh rates of 24Hz, 30Hz, 50Hz and 60Hz (1080p)
- Robust Class B HDBaseT transmission technology for stable HD distribution and control offering the trademark HDBaseT resistance to electrostatic and environmental interference compared to conventional UTP transmission
- 24bit color (4K), 36bit Deep Color (1080p)
- HDMI with full 3D compatibility with frame packing/ sequential (Blu-ray) and interlaced stereoscopic (satellite/ cable broadcasts)
- Low profile chassis of 18mm / 0.71” for easier, more convenient installations behind screens at display zones
- Multichannel audio supports 7.1 DT Master HD and Dolby True HD
- Power-over-HDBaseT (PoH) - low-voltage power passed directly along Cat5e/6 up to 35m/114ft (4K) or 70m/230ft (1080p) from compatible transmission device to all connected PoH-enabled receivers for local power required at display locations
- Additional power connectivity via threaded bushings for both standard and locking DC power plugs and phoenix connector
- Transmits discrete wide-band 2-way IR control signals together within the HDMI signal over a single Cat5e/6
- Switchable RS-232 for firmware updates serial third party control of matrix switching from display zones if connected to a compatible HDBaseT transmission device - check website for compatibility
- Open source integration protocols available for market leading control systems
- LED indication for visual power supply to receiver, signal status to show established connection to display, HDBaseT link to transmission device and HDCP confirmation to illustrate the presence of encryption within a signal
- HDCP compliant with constant feed to prevent screen dropouts
- Cable termination follows IEEE-568B standards
- Internal handling of EDID and automatic adjustment of feedback, equalization and amplification of signal for easy set-up