技术细节
| 季节性能效等级（降温）（SEER） |
5.6 |
| 运转温度（采暖）(T-T) |
-15 - 30 °C |
| 压缩机类型 |
Rotary |
| 制冷瓦量（最小） |
4200 W |
| 制冷瓦量（最大） |
6700 W |
| 制热瓦量（最小） |
4480 W |
| 制热瓦量（最大） |
7200 W |
| 运转温度（制冷）(T-T) |
0 - 50 °C |
| 制冷剂 |
R410A |
| 逆变器技术 |
Y |
| 适用房间最大面积 |
185 m³ |
| 季节性能效等级（采暖）（SCOP） |
3.8 |
| Timer |
Y |
| 类型 |
Split system air conditioner |
室内单元
| 室内机深度 |
188 mm |
| 室内机高度 |
275 mm |
| 室内机宽度 |
800 mm |
| 噪音水平（室内单元） |
58 dB |
| 室内机重量 |
17000 g |
| 室内机国际防护等级认证（IP）代码 |
IP20 |
室外单元
| 室外机宽度 |
845 mm |
| 室外机深度 |
320 mm |
| 室外机高度 |
700 mm |
| 室外机重量 |
48000 g |
| 噪音水平（室外单元） |
63 dB |
| 室外机国际防护等级认证（IP）代码 |
IP24 |
能量控制
| 全年能源消耗 （采暖）（一般采暖季） |
2063 kWh |
| 消耗功率（冷却）（最大） |
1840 W |
| 消耗功率（加热）（最大） |
1750 W |
| 全年能源消耗 （降温） |
338 kWh |
SM33 Duo - 2.7 kW, 230 V, 50 Hz
Flexible matching of multiple indoor units with only 1 outdoor unit: This air conditioning set can be operated with one up to two indoor units on one outdoor unit. Saving the investment for an eventual second outdoor unit when a consumer needs two indoor units. The indoor units can run independently from each other. It is not possible that one (or more) indoor unit is heating and other indoor unit is cooling. Heating is leading.
Cooling + dehumidifying + heating (heat pump): The air conditioning is a complete air treatment system. It can cool, dehumidify and heat the air.
Air conditioning: In COOLING mode the unit produces a pleasant and refreshing cool airflow.
Heating: In HEATING mode the unit produces a warm and comfortable airflow. Also the free of charge energy from the outdoor air is used to increase the efficiency of the system.
Dehumidifying: In DRY mode the unit dehumidifies the air in the room as efficient as possible. Note: In COOLING mode the air is also dehumidified.
Inverter technology: maximum comfort: The Zibro DC Inverter Wall Mounted Split air conditioner continuously adjusts the cooling and heating capacity according the desired room temperature. When the desired temperature is reached, the compressor speed is gradually decreased to maintain the room temperature with a minimum of variation. By varying gradually the compressor capacity, the expected lifetime as well as the experienced comfort level will increase. Looking at the experienced comfort level for the user of the inverter system: Non-inverter air conditioners, which operate at a constant speed, must turn on/off the compressor to control the room temperature causing less comfortable temperature fluctuations.
Inverter technology: minimum energy consumption: The compressor starts to slow down as the room
temperature reaches the desired temperature. As a result, the over all power consumption is reduced significantly (up to 35% less than non inverter/ conventional types).
