Leistung
| Glühbirnengröße |
T8 |
| Chromatizität Koordinate X |
383 |
| Chromatizität Koordinate Y |
386 |
| Farbwiedergabeindex |
82 |
| Farbtemperatur |
4100 K |
| Dimmbar |
N |
| Quecksilbergehalt |
2 mg |
Energie
| Energieverbrauch (1000 Stunden) |
15 kWh |
Zusätzlich
| Energie-Effizienzklasse |
A |
MASTER TL-D Power Saver Set, G13, 4100 K, 2.0 mg, 78 g
The MASTER TL-D Power Saver Set is a perfect solution for upgrading your existing lighting installation with a special TL-D lamp with an intelligent starter. It offers considerable energy savings while maintaining the same lighting level and a better light quality. The MASTER TL-D Power Saver Set is easy to install, simply by changing the lamp and the starter. The benefits are huge in all current installations with TL-D lamps.
<b>Benefits</b>
- Significant energy saving while maintaining light levels and improving light quality in comparison with TL-D Standard colours lamps (halophosphate)
- Higher colour rendering than TL-D Standard colours lamps (halophosphate)
- Longer lifetime than TL-D Standard colours lamps (halophosphate)
- Instant, smooth and flicker-free start-up of the lamps
- Lamps are switched off directly at end-of-life, preventing irritation (no flickering), unnecessary electricity consumption and fire risk
- Starter contains flame-retardant components; UV-resistant canister ensures increased safety and secure ignition
<b>Features</b>
- Up to 30% energy saving, while maintaining the lighting level compared to a TL-D Standard colours lamps (halophosphate), is achieved by an intelligent electronic starter in combination with the most efficient fluorescent TL-D lamp
- Designed for operation on electromagnetic gear only
- Full thermal safety monitoring which cuts off defective or end-of-life lamps
- Instant flicker-free ignition (nom. 2.0 seconds)
- Can be ignited from -15 to +50 °C
- Product range is RoHS-compliant
- Product range is covered by WEEE.
<b>Application</b>
- Suitable to replace TL-D Standard colours lamps (halophosphate) in all existing TL-D luminaires with electromagnetic gear (220/240V, 50 Hz). Use on 60 Hz and/or 110 V systems leads to non-functionality of the system.
- Can also be used to replace MASTER TL-D Super 80 lamps, but the light output of the total installation will then be reduced by approximately 20%.
<b>Warnings and Safety</b>
- A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
