Proxxon PD 250/E Metalworking lathe Precision lathe, 250mm Centre, Swing 70mm, cross slide 43mm, 12kg
<b>For face, longitudinal and taper turning, thread-cutting. For machining st
Proxxon PD 400 Lathe system
<b>The Lathe PD 400 is the heart of a multifunctional and expandable system and is unequalled in its class!</b>\nIdeal for s
Einhell BT-ML 300 BT-ML 300, 230V, 50Hz, 370W, Idle speed (step 1): 0 - 1100 RPM, Idle speed (step 2): 0 - 2500 RPM, Jaw chuck bore 15 mm, Max. spindle admission 20 mm
Proxxon 24 262 Lathe precision vice Precision V-blocks
Used to clamp various work pieces. Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V
Proxxon 24 255 Precision vice PM 40
Jaw width of 46mm. Clamping capacity 34mm. Total length 70mm
Proxxon 24 257 Step clamp set, of milled steel
For work pieces up to 35mm thickness. Two each step blocks and clamps. With matching nuts and screws for fixation in
Proxxon 24 036 4-jaw chuck with independent jaws
For clamping angular and asymmetrically shaped work pieces. Capacity up to 80mm. Chuck Ø 75mm
Proxxon 24 010 Fixed steady for longer work pieces
Especially for boring. Also required if the tailstock cannot be used to "counter". Up to Ø 40mm
Proxxon 24 044 Dividing attachment TA 250
For accurate machining of circular work pieces (e.g. production of gear wheels). Supplied with two dividing discs (40 and
Proxxon 24 038 Collet set with ER 20 collets: For extreme true concentric accuracy. 2 - 10mm.
For high precision machining of round parts. The collet set is mounted
Proxxon 24 026 Quick change tool post - easy to use!
For quick tool change and easy height adjustment. Includes 2 tool holder elements
Proxxon 24 014 Centre turning attachment.
For highest accuracy with high rotational precision.\nThis includes: 1 face plate, 2 fixed centres (MK 2 and MK 1/short) a
Proxxon 24 419 Collet attachment including collets
For accurate use on round components. One hardened collet each hardened collet 2.0 - 3.0 - 4.0 - 5.0 - 6.0 - 8.0
Proxxon 24 415 Tool post for PD 400
Including two holders. Provides quick tool changes with easy height adjustment
Proxxon 24 412 Faceplate and clamps
Is fitted instead of the standard chuck. Ideal for clamping larger and asymmetrically shaped work pieces. Ø 125 mm. 2 continuous
Proxxon 24 410 4 jaw chuck, self-centering
The jaws are not independently adjustable, i.e. they are self-centering. High accuracy. Chuck diameter 100mm
Proxxon 24 404 Fixed steady
Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is ina
Proxxon 24 266 14-piece parallel supports set
Ground in pairs For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened ste
Proxxon 24 414 Centre turning accessory for the PD 400
Ideal when turning with highest possible accuracy. Supplied with 2 dead centres (MK2 and MK3), drive/ face pl
Proxxon 24 417 Parting tool holder and tool
Used in the PD 400 quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt
Proxxon 24 421 Universal dividing table UT 400
For accurate machining of circular work pieces. The table may be fixed horizontally or vertically. Worm drive for div
Proxxon 24 406 Travelling steady
Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum Ø 50mm
Proxxon 24 408 4 jaw chuck, self-centering
The jaws are not independently adjustable, i.e. they are self-centering. High accuracy. Chuck diameter 100mm
Proxxon 24 402 Splash guard and chip collecting tray for lathe PD 400
Made from 1.5mm steel plate, powder coated. A welded cover protects the motor. Mounting holes
Proxxon 24 140 Fine feed for milling machine PF 230
Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed i
Proxxon 24 254 Fine feed for accurate adjustments
Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwh
Proxxon 24 070 Centre turning attachment
<b>Used for highest accuracy with high rotational precision.</b>\nOne face plate, 2 fixed MK 1 (short) centres
Proxxon 24 080 Fixed steady
Used when turning long, slender pieces, capacity up to 40mm (Ø). Also used when the tailstock cannot be utilised
Proxxon 24 131 Dividing attachment TA 230 for PF 230
For accurate machining of circular work pieces (e.g. production of gear wheels). Supplied with two dividing dis
Proxxon 24 030 Four jaw chuck
The 4 jaws are adjusted independently, thus clamping unsymmetrical pieces, ovals, squares and odd-shaped work pieces. Capacity of 80mm
Proxxon 24 042 Collet set covering 2.0 - 10mm
<b>For concentric accuracy better than 0.02mm.</b>\nFor accurate use on round components. The collets are
Proxxon 24 061 Radius cutting attachment
Mounted on the cross slide in place of the tool holder. Cuts convex and concave shapes to depth of 1.0mm in steel as well a
Proxxon 24 022 Quick change tool post f/ PD 230/E
Enables quick tool changes and easy height adjustments. Including 2 tool holders for lathe tools up to 10 x 10mm
Proxxon 24 020 Gear chuck
Capacity to 10mm, with key and MK1, for tailstock
Proxxon 24 006 Splash guard and chip collecting tray for PD 230/E
Made from 1.5mm thick sheet metal, powder coated. Bevelled edges at the front and back allow sligh
Proxxon 24098 Tool Holder for Rotary Tools
This holder allows mounting of our rotary tool IB/E (collar size 4/5" (20 mm)) to the tool post of the Lathe PD 230
Proxxon 27 020 MICRO woodturning lathe DB 250
<b>Turning in miniature is a pleasing hobby.</b>\nOne can make glasses, cups, saucers, vases and columns f
Proxxon PD 230/E Lathe system PD 230/E
Usable on materials such as steel, brass, aluminium and plastic. Complete with automatic feed, thread cutting capability, heads
bintime_test_13 test5655531231765 21515215
