EXE 159, 4 x Sat-IF, 5-862 MHz & 950-2150 MHz
<b>Features</b>
- Cascadable single-cable multi-switches for distribution of digital Sat-IF signals (four Sat polarities; including HDTV) and terrestrial signals via one cable to up to nine receivers.
- No limitation in the number of programmes – the complete programme range of one satellite is distributed.
- The selected transponder is transmitted by the multi-switch on a fixed frequency (user band), controlled by the receiver with a DiSEqC™ command set conforming to EN 50494.
- The multi-switch supports the extended single-cable set of commands SCD2 conforming to prTS 50607.
- The extended set of commands prTS 50607 allows all user bands to be addressed; the standard EN 50494 only allows addressing of user bands 1-8.
- Terrestrial signals can be received even when the satellite receiver is switched off.
- Each receiver is assigned a fixed subscriber frequency (userband); a twin receiver requires two subscriber frequencies.
- PIN code: Protects the user frequency from being accessed by another user. This allows installation in apartment buildings.
- Integrated AGC (Automatic Gain Control) ensures a constant output level in the Sat-IF range.
- EXE 259 single-cable multi-switches and additional loop-through multi-switches such as EXR 2541, EXR 2554, EXR 2558 and EXR 2542 can be combined as desired.
- Up to eight multi-switches can be cascaded.
- For indoor installation.
<b>EXE 159:</b>
- Single-cable multi-switch for up to nine receivers, with an integrated power supply unit for LNB supply.
- Low power consumption due to highly efficient, short-circuit proof switched-mode power supply unit in compliance with ERP guideline and energy-saving concept (the single-cable multi-switch is switched off whenever the connected receiver is switched off).
- Kathrein-Power-Saving: LNB supply is switched off as soon as all receivers, whether in the cascade or connected to the EXE 159, are inactive. This function can be deactivated, e.g. if loop-through multi-switches without "Kathrein Power Saving" are used in the cascade.
- LNB remote feeding via the "horizontal low" input. Kathrein Power Saving signalling over the "vertical low" trunk. All other inputs are voltage-free.
