扬声器
| 低音炮 |
Y |
| Subwoofer driver diameter (imperial) |
8 " |
| 低音炮 寸法 |
6.5 " |
| 扬声器置放位置 |
In-wall/in-ceiling |
| 驱动程序数量 |
2 |
| 扬声器数量 |
2 |
| 扬声器类型 |
2-way |
| 放大器 |
N |
| 推荐使用 |
Other |
| Driver diameter |
200 mm |
音频
| 灵敏度 |
89 dB |
| 频率范围 |
80 - 20000 Hz |
CS-1600 Speaker, 30W, 80Hz -20kHz, 200mm (8”), 3kg, White
Vision CS-1600 ceiling mounted speakers are passive 8-ohm low impedance speakers vision cs-1600 don’t sacrifice frequency range in the way that the transformer on 100/70v speakers inherently do, meaning lower bass extension and higher treble without distortion.
Powerful and robust 30W power handling from the vision cs-1600 translates into loud sound with no distortion and with a frequency response of 80Hz -20kHz response the 2-way design offers full-bandwidth delivery with control and clarity.
Improved crossover design on the vision cs-1600 provides superb off-axis dispersion characteristics. Ceiling speakers inherently lack power at the bottom end, so Vision cs-1600 have been tuned to have a slightly louder sensitivity of 89dB to punch through high-noise environments. The 6.5” WOOFER, (Main speaker unit) of the cs-1600 is a 6.5” polypropylene cone with a 3/4” Ferro-fluid cooled silk tweeter set in a swivel mount for fine tuning of the stereoscopic image.
The Vision CS 1600 speaker is designed for unobtrusive sound dispersion whilst mounted flush into false ceilings and ceiling tiles or deep custom made plaster board cavity walls, a perfect alternative for situations where wall speakers are not appropriate.
Simple to install, a cardboard template is provided so that you can cut out the hole by hand using a pad saw or just purchase a 210mm hole-saw with an arbor (Not Included) from your local hardware supplier to drill the required hole size into the surface where the speaker will be mounted you, can then connect your speaker wires directly into the spring loaded terminals and fit the speaker in place! It’s clean and easy, job done.
