FEIN 63901021014 drill attachment accessory QuickIN-adaptor, Output Weldon
Output Weldon\n \nSuitable for:\nKBM 32 Q (KBM 32 Q), KBM 50 Q (KBM 50 Q), KBM 50 U (KBM 50 U), KBM 65 U (KBM 65 U), K
FEIN 92602089010 drill attachment accessory 3/4" Weldon shank, M6-M20
Tapping rapid change chuck for KBM 50 Q, KBM 50 U, KBM 52 U, KBM 65 U\n\nonly usable on magnetic core drill units with
FEIN 3/4 in Weldon mounting shaft 3/4 in Weldon mounting shaft, Cutting depth 50mm, Bore 12 - 65mm, Taper MK 3
For using FEIN core drills on bench and column drilling machines and all
FEIN QuickIN-adaptor QuickIN-adaptor, Output 0.5"
Output 0.5"\n\n<b>Suitable for:</b>\nKBM 32 Q, KBM 80 auto, KBM 80 U, KBM 50 U, KBM 50 Q, KBM 65 U
FEIN Extension Extension, 100mm
For use on narrow, deep, or stepped surfaces. QuickIN-PLUS mount, 4 in (100 mm) length, includes adapter for pilot bits.\n\n<b>
FEIN Extension Extension, 100mm
For use on confined, deep, or layered surfaces, through holes possible as of Ø 36 mm. QuickIN fitting, length 100 mm, including cent
FEIN QuickIN-adaptor QuickIN-adaptor, Output M18 x 6 P 1.5
Output M18 x 6 P 1.5\n\n<b>Suitable for:</b>\nKBM 32 Q, KBM 80 auto, KBM 80 U, KBM 50 U, KBM 50 Q,
FEIN Weldon mounting shaft Weldon mounting shaft, Cutting depth 75mm, Bore 12 - 65mm, Taper MK 3
With internal cooling lubricant supply.\n\n<b>Suitable for:</b>\nKB
FEIN Weldon mounting shaft Weldon mounting shaft, Cutting depth 50mm, Bore 12 - 65mm, Taper MK 3
With internal cooling lubricant supply.\n\n<b>Suitable for:</b>\nKB
FEIN Enlargement tapers Enlargement tapers, Mount MT 3/MT 4
For M.T. sockets\n\n<b>Suitable for:</b>\nDDSk 672, DSke 672, DDSk 672-
FEIN QuickIN-adaptors QuickIN-adaptors, Bore 12 - 65 mm, Taper MK 3
For retrofitting the KBM 52 U ( 7 270 31), KBM 65 Q (7 270 26) and KBM 65 QF (7 270 23) models. Integra
FEIN Weldon 32 Standard output Weldon 32 Standard output, 50mm
Specially designed for core bits with cutting surfaces offset by 90°. Maximum cutting depth 50 mm.\n\n<b>Suitab
FEIN Weldon 32 output Weldon 32 output, 75mm
Clamping surfaces in line. Maximum cutting depth 75 mm. Specially designed for core bits from:\n\n<b>Suitable for:</b
FEIN QuickIN adapter shafts QuickIN adapter shafts, Cutting depth 75mm, Bore 12 - 35mm
For using FEIN core drills on bench and column drilling machines and all other core drilli
FEIN QuickIN-adaptors QuickIN-adaptors, Cutting depth 75mm, Bore 12 - 65mm
For using FEIN core drills on bench and column drilling machines and all other core drilling uni
FEIN QuickIN-adaptors QuickIN-adaptors, Cutting depth 50mm, Bore 12 - 35mm
For using FEIN core drills on bench and column drilling machines and all other core drilling uni
FEIN QuickIN drive QuickIN drive, 12 - 65mm
For retrofitting KBM 80 U / KBM 80 auto. With integrated cooling lubricant supply. For all QuickIN core bits 7/16 - 2-9/16 i
FEIN QuickIN MAX output QuickIN MAX output, 50-80mm
For retrofitting KBM 80 U / KBM 80 auto. With integrated cooling lubricant supply. For all FEIN QuickIN MAX core bits wit
