Data transmission
MAC address table |
8192 entries |
Switching capacity |
48 Gbit/s |
Maximum data transfer rate |
1 Gbit/s |
Other features
Connectivity LEDs |
Y |
Electromagnetic emissions |
EN 55022 Class A, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class A, CISPR22 Class A, ICES-003 Class A, VCCI Class A |
Authentication method |
IEEE 802.1X |
Packet transfer speed |
35.5 Mpps |
Networking features |
10/100/1000 |
Power supply type |
AC |
Networking
Full duplex |
Y |
Link aggregation |
Y |
Operational conditions
Heat dissipation |
286.7 BTU/h |
Ports & interfaces
SFP/SFP+ slots quantity |
4 |
Basic switching RJ-45 Ethernet ports quantity |
28 |
Copper ethernet cabling technology |
1000BASE-T, 10BASE-T |
Gigabit Ethernet (copper) ports quantity |
24 |
Combo SFP ports quantity |
4 |
Performance
Memory type |
DRAM |
Internal memory |
64 MB |
Flash memory |
32 MB |
Protocols
Management protocols |
SNMP v1, SNMP v2 |
Design
Safety |
UL 60950-1, EN 60950-1, CSA 22.2 60950-1, IEC 60950-1 |
Management features
Quality of Service (QoS) support |
Y |
Power over Ethernet (PoE)
Power over Ethernet (PoE) |
N |
Affordable, Managed Gigabit Switching with Flexible Uplinks
The "smart" 3Com® Baseline Switch 2924-SFP Plus is a web-managed Layer 2 Gigabit Ethernet switch. It offers enterprise-class features, customized and priced for small- and mid-sized organizations.
With an easy-to-use switch interface and advanced features (VLANs, IEEE 802.1X authentication and Rapid Spanning Tree), this switch is the most cost-effective way to provide a converged network.
Layer 2 Switching with Advanced Features
The Baseline Switch 2924-SFP Plus has twenty-four 10/100/1000 ports and four dual-purpose Gigabit ports (copper or SFP-based fiber) to connect to high-performance computers, servers, or core network backbones.
This "smart" switch has the features that help build a voice ready network, with support for auto-voice VLAN, SNMP-based management, IGMP snooping and query, and IEEE 802.1X and advanced Access Control Lists (ACLs) for strengthening security.
The switch provides non-blocking performance— all ports perform at wirespeed which helps to eliminate network traffic bottlenecks. LACP link aggregation (IEEE 802.3ad) allows ports to be automatically grouped together to form an ultra-high-bandwidth connection that greatly expands bandwidth capacity to the network backbone.
The Baseline Switch 2924-SFP Plus also supports Spanning Tree and Rapid Spanning Tree, traffic prioritization, priority queuing and VLANs. These switching features ensure optimal use of available bandwidth as traffic flow is directed according to the needs of the business.
No Switch Setup Required
This Baseline Plus switch is operational straight out-of-the-box; as long as default settings are acceptable, there is no need to configure the switch. If desired, the switch can be configured using a web browser or SNMP management software.