Other features
| Electromagnetic emissions |
Canada ICES-003 Class B, FCC Part 15, Class B, EN 55022 Class B, CISPR 22 Class B, CNS 13438 Class A, ETSI EN 301 489-17 |
| Safety |
EN 60950, IEC 60950 Edition 3, UL 60950 3rd edition,/CSA 22.2 60950, European Community CE notice |
| Compliance industry standards |
EN60060 (IEC68), UL listed-CSA |
| Networking features |
Ethernet/Fast Ethernet |
Protocols
| Data link protocols |
Wi-Fi, IEEE 802.11b, IEEE 802.11g, IEEE 802.3, IEEE 802.3af, IEEE 802.1X, IEEE 802.1Q, AES, WPA, WEP, HTTP, SNMP |
Performance
| 2.4 GHz |
Y |
| Number of users |
64 user(s) |
| Frequency band |
2.4 - 2.4835 GHz |
Antenna
| Antenna type |
1 x 2dB Gain antenna wi RP-SMA |
Additionally
| Indoors max range |
100 m |
| Transfer rate (Mbps) |
108 Mbit/s |
Wireless Access Point 108Mbps 11g PoE
Wireless Freedom and Versatility with Sophisticated Features
No need to drill holes or run Ethernet cabling to set up your network. The Wi-Fi-certified 3Com® PoE access point is an attractive solution for cost effectively and securely extending mobile access to wired network resources or creating full-featured networks in small and medium businesses, remote sites, or temporary locations. Each access point (AP) supports up to 64 wireless users, so there is plenty of room for growth.
PoE support overcomes installation problems by eliminating the need for an AC power plug at each AP. The 3Com Baseline Switch 2226- PWR Plus or other 802.3af-compliant PoE products can supply both power and data to the access points through Category 5 or 6 Ethernet cabling, giving you flexible installation options in hard to wire or reach locations.
Tough WPA and TKIP and U.S. government-standard AES encryption provide the latest standards-based security. For additional protection, the AP supports 802.1X and MAC address access control, authentication, and authorization through backend RADIUS servers. 802.1Q-compliant VLAN support combined with the multiple SSID and security profiles let you design flexible security for different user groups, control access to network resources, and segment user traffic. Versatile Wireless Distribution System (WDS) solves complex wireless connectivity problems, supporting point-to-point, point-to-multipoint, repeater and client modes.
Features
- PoE eliminates installation problems with hard to wire or reach locations, supplying power over Category 5 or 6 data cables.
- 802.11g standard supports speeds up to 108 Mbps in SuperG mode for high-speed access and wide coverage.
- Supports toughest industry-standard WPA and TKIP and U.S. government AES encryption; also supports legacy WEP clients.
- Multiple SSID support allows SSIDs to be bridged together or isolated for flexible security control.
- 802.1Q VLAN groups users according to data or traffic requirements to segment traffic flow based on business priorities.
- MAC-based and 802.1X AAA support centralizes wireless security through existing network RADIUS servers.
- Rogue AP detection identifies and logs unauthorized, potentially harmful APs.
- Access control screens device MAC addresses to ensure only trusted clients access the WLAN.
- Wi-Fi certified 802.11g helps ensure interoperability with Wi-Fi-certified products from other vendors; supports both 11g and 11b users.
- AP can function as a bridge supporting point-to-point, point-to-multipoint, repeater, and client modes.
- Auto configuration and Auto firmware update simplify and speed setup and operation.
- Familiar Web browser interface lets you configure and manage APs from anywhere on the network.
