Other features
| Supported data transfer rates |
54, 48, 36, 24, 18, 12, 9, 6 Mbit/s |
| Electromagnetic emissions |
EN 55022 Class A, FCC 15 Subpart B Class A, EN 60111 3-2, ICES-003 Class A, VCCI Class A, CNS 13438 Class A, EN 55024 |
| Safety |
UL 60950 2000 +ZB, ZC deviations, EN 60950 1999, CSA 22.2 60950 3rd, NOM-119 SCFI, AS/NZS 60950 2000 |
| Maximum operating distance |
100 m |
| Compliance industry standards |
IEEE 802.11a, 802.11b, 802.11g |
| Networking features |
Ethernet / Fast Ethernet |
Security
| Authentication method |
IEEE 802.11i, 802.1x RADIUS |
| Security features |
WEP 40-/64-, 104-/128-bit\nTKIPWPA, WPA2 (IEEE 802.11i/RSN)\n64-, 128-bit AES \nSSID\nIEEE 802.1X network login\nACLs, VLAN\n |
Protocols
| Media access protocol |
CSMA/CA |
Ports & interfaces
| Cabling technology |
10BASE-T/100BASE-TX |
Performance
| 2.4 GHz |
Y |
| 5 GHz |
Y |
| Frequency band |
5, 2.4 GHz |
Power
| Power over Ethernet (PoE) |
Y |
Additionally
| Transfer rate (Mbps) |
54 Mbit/s |
Wireless LAN Managed Access Point 3150- 10BASE-T/100BASE-TX/ 100 m/ 802.3af PoE-Port.
Features & Benefits
Lets Users Connect Securely to the Wireless LAN and Roam
The 3Com® Wireless LAN Managed Access Point 3150 offers a cost-effective and convenient wireless solution for enterprise-class, dual-band wireless connectivity. Its sophisticated security features support the latest encryption and virtual LANs (VLANs) for secure remote communications.
The Managed Access Point (MAP) works with 3Com wireless LAN switches and controllers: the switches control and monitor performance of the access points (APs) through their automatic, “no-touch” remote configuration and management capabilities, eliminating the need for onsite IT expertise. The wireless switches and controllers boost MAP the coverage and service by optimizing RF gain, assigning radio channels, balancing user loads, and sweeping the RF environment to identify and isolate potentially harmful rogue APs or other infiltrators.
The dual radios in the Managed Access Point 3150 enable simultaneous 11b/g and 11a operation, expanding connectivity support and user bandwidth availability. Connectors for external antennas support customized installations and coverage areas.
The AP3150 MAP can be powered by the wireless switch or any other Power over Ethernet (PoE) device. This PoE functionality eliminates the need for an AC power plug at each MAP, giving users flexible installation options in hard-to-wire or reach locations.
- Dual-radio MAP operates simultaneously in IEEE 802.11a and 802.11b/g mode.
- For optimized security, the multi-band RF sweeps scan the wireless environment for both 802.11a and 802.11b/g rogue access points simultaneously; RF scans also detect ad-hoc users and sources of RF interference.
- PoE support either directly through a 3Com WLAN switch or controller or other IEEE 802.11af-compliant device supplies data and power over the same Ethernet cable, eliminating the need for power adapters, power cords, or AC outlets.
- Advanced Encryption Standard (AES), Wi-Fi Protected Access 2 (WPA2), dynamic Temporal Key Integrity Protocol (TKIP), and Wi-Fi Equivalent Privacy (WEP) packet encryption help ensure strong data security.
- Support for independently encrypted and isolated subnets or VLANs using the same service set identifier (SSID) provides deployment felxibility.
- New or replacement MAPs inherit configuration information from the WLAN switch without the need for pre-staging or pre-configuration.
- Automated transmit power and radio channel assignment features optimize RF cell size and support different regional requirements.
- Comprehensive MAP control and management—such as channel number, power level, SSIDs, and security settings—are all handled by the WLAN switch.
- Dual-mode antennas provide excellent performance and coverage in high multi-path environments; a variety of external dual-mode antennas is supported for flexible installation options.
