ABUS FUAA10011 security or access control system

Secvest IP wireless alarm control panel <b>Special product features:</b>
- Up to 11 wireless detectors in three zones and 3 additional operating units
- Push notification to iPhone and iPad
- Programming and operation via integrated web server
- Active alarm verification via video motion detection (in conjunction with PIR network camera)
- Alarm images are saved in the alarm panel
- E-mail notification of alarms
- Compatible with IP alarm module
- Internal arming possible
- Voice notification of alarms
- Fast notification through Voice-over-IP calls with voice message in case of alarm

Combining alarm and video technology.
For use in flats and smaller properties.
The Secvest IP system combines alarm technology with brilliant video technology and thus creates an innovative IP-based system which reliably warns you about break-ins, fire and water – including push notifications for mobile devices. In an emergency, alarms can be verified via a connected PIR network camera which provides a true picture of the situation. The centre can be operated using a web browser or iPhone / iPad application, so that direct access to the Secvest IP wireless alarm centre is not necessary. Internal activation is also possible.
The 10 LEDs on the centre are used to indicate its status, plus the status of detectors and operating elements. Alarm messages are completely IP-based. An e-mail is sent in the event of an alarm – including an attached image (when the PIR network camera is connected). Alternatively, the centre can inform you of an alarm by voice message by calling a mobile device, PC or landline phone using VoIP. The optional internal siren is used to indicate local alarms. Additionally, the Secvest IP enables access to the saved alarm images on the connected PIR network cameras. The Secvest IP can be expanded by two IP alarm zones using the optional IP alarm module.