Display
| Display diagonal |
4.3 " |
| HD type |
Not supported |
| Native aspect ratio |
16:9 |
| Contrast ratio (typical) |
350:1 |
| Display brightness |
300 cd/m² |
| Display technology |
TFT |
| 3D |
N |
| Supported graphics resolutions |
480 x 272 |
| Aspect ratio |
4:3, 16:9 |
| Display |
LCD |
Ports & interfaces
| Composite video in |
1 |
| DVI port |
N |
| Audio input |
Y |
| DC-in jack |
Y |
Weight & dimensions
| Depth |
2.76 mm |
| Width |
105.48 mm |
| Weight |
148.64 g |
| Height |
67.33 mm |
Multimedia
| TV tuner integrated |
N |
| Built-in camera |
N |
| Built-in speaker(s) |
N |
Additionally
| Colour of product |
Black |
| Display diagonal |
11 cm |
| AC adapter bundled |
Y |
10.922 cm (4.3 ") , 16:9, 300cd/m2, 350:1
NTSC/PAL (Television) TFT Display - 4.3" Diagonal
Yes, this is an adorable small television! The visible display measures only 4.3" (11cm) diagonal, the TFT comes with a NTSC/PAL driver board, enclosure and stand. The display is very easy to use - simply connect 12VDC to the 2.1mm center-positive DC jack (or use the cable and connect to the red and black wires), then connect a composite video source to one of the RCA cable. Voila, a television display! There's three little buttons in the back that let you enter a menu system for adjusting brightness, color and contrast. The display has two composite plugs, AV1 and AV2. AV1 is the default and if AV2 goes 'live' it replaces AV1.
To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.
A power adapter is not included you will want one of our 9VDC 1 Amp or 12VDC 1 Amp adapters or provide one of your own. Even though the display specifies 12VDC we found it works from 6V to 12V DC without problems.
