Technical details
| Type |
AV transmitter |
| Maximum transfer distance |
150 m |
Power
| Operating voltage |
5 V |
| Input current |
2.5 A |
Ports & interfaces
| VGA (D-Sub) ports quantity |
2 |
| Serial ports quantity |
1 |
| RJ-45 output ports |
4 |
| DC-in jack |
Y |
Weight & dimensions
| Transmitter dimensions (WxDxH) |
100 x 100 x 25 mm |
LPV154T - 1920x1200@60Hz, 2 x 15 pin VGA, 4 x RJ45, 1 x power, 1 x 4P4C RS232
This digital signage extender is possibly the easiest to install point-to-point extender available today. By transmitting the power to the receiver via the cable it removes the need for extra power supplies and sockets at the screen.
A 4-way transmitter is available for point-to-multipoint transmission.
Video performance
Full HD 1080p, 1080i & 720p
Distances up to 150m (500ft)
Line power for simplicity
To help reduce cable clutter, the ADDERLink LPV150 has been designed to be powered by a USB port on your computer. Furthermore, this power is also transmitted alongside the video over the CATx cable, in turn powering your receiver unit.
4-way transmitter for point-to-multipoint
The ALPV154T is able to take the same HD input and send it to 4 different screens connected via the ALPV150R receivers. There is a feed through port on the unit to allow a local display or you can cascade another ALAV154T so you can supply 8 screens.
Video sharpness adjustment
The remote module has a video adjustment screw to control picture sharpness on the display screen.
Absolute simplicity
Getting into professional digital signage has never been so easy. Simply plug the transmitter's VGA port into your computer and plug in the USB port, then plug the receiver unit into your screen. Finally, connect the two units together with a length of CATx cable, and you're finished. Now start delivering your message to customers, clients, staff or whoever you wish.
Advanced EDID cloning
The ADDERLink LPV enables the user to clone the EDID (Extended Display Identification Data) from a display or use a default EDID. This approach enables the widest possible compatibility whilst also providing a plug and play experience for most applications.
Rack mountable
The LPV154T units are rack mountable at high density using the AdderLink rack mount chassis.
Fit and forget
Adder digital signage products are the professional choice because they give you the ability to deliver, fit and forget installations. The LPV is no exception.
