Management features
Multicast support |
Y |
Web-based management |
Y |
Quality of Service (QoS) support |
Y |
Data transmission
MAC address table |
8000 entries |
Supported data transfer rates |
10/100/1000 Mbps |
Switching capacity |
8.8 Gbit/s |
Number of trunks |
6 |
Number of VLANs |
255 |
Other features
Authentication method |
IEEE 802.1x, RADIUS AAA |
Installed ports |
24 x 10/100 Mbps, 2 x 10/100/1000 Mbps, 2 x SFP |
Remote administration |
CLI |
Power LED |
Y |
Input frequency |
50 - 60 Hz |
Wi-Fi |
N |
Networking
Port mirroring |
Y |
Broadcast storm control |
Y |
Auto MDI/MDI-X |
Y |
Link aggregation |
Y |
Spanning tree protocol |
Y |
10G support |
N |
Ports & interfaces
SFP/SFP+ slots quantity |
2 |
Basic switching RJ-45 Ethernet ports quantity |
26 |
Fiber ports quantity |
2 |
Gigabit Ethernet (copper) ports quantity |
2 |
Copper ethernet cabling technology |
100BASE-TX, 1000BASE-T, 10BASE-T |
Console port |
RS-232 |
SFP module slots quantity |
1 |
Performance
Internal memory |
16 MB |
Stackable |
Y |
Protocols
Management protocols |
SNMP v2, SMTP |
Power
Input voltage |
100 - 250 V |
Power over Ethernet (PoE)
Power over Ethernet (PoE) |
Y |
Additionally
Wireless technologies |
Wired |
24 x 10/100 Mbps, 2 x 10/100/1000 Base-T Mbps, 8.8 Gbps, DB-9, RS-232, 16 MB memory, PoE, 8000 Mac addresses, LEDs
A fully managed Layer 2 Ethernet switch designed for cost-effective Local Area Network (LAN) switching. Ideal for new installations or network upgrades, these switches are perfect for business-class applications requiring Fast Ethernet.
- Low cost, fully managed, 24-port, 802.3af Power over Ethernet (PoE) switch
- Standards-based for ease of interoperability
- Class of Service (CoS) for prioritizing VoIP traffic
- Gigabit SFP/1000Base-T port for high-speed uplink or stacking
- Stack up to 16 switches for one larger switch and manage stack via a single IP address
- Non-blocking, up to 8.8 Gbps switching capacity
- 802.1D Spanning Tree and 802.1w Rapid Spanning Tree support
- Segment LAN with up to 255 VLANs (802.1Q tagged or port-based)
- Recognizable Command Line Interface (CLI) to reduce learning curve
- Intuitive Web-based Graphical User Interface (GUI) with step-by-step setup wizards
Features and Benefits
- Integral 24-port Power over Ethernet (PoE) switch for powering 802.3af-compliant devices like wireless access points (WAP), surviellence camera, or IP phones
- Two Gigabit SFP/1000Base-T ports for high-speed uplink or stacking
- Stack up to 16 switches for one larger switch and manage stack via a single IP address
- Non-blocking, up to 8.8 Gbps switching capacity