Aiptek VFI 1000 LCD 1000VA Black uninterruptible power supply (UPS)

VFI 1000 LCD, 1000VA/800W, USB, RS-232, LCD, 13200g PowerWalker VFI 1000 LCD designed multiple microprocessor and double conversion on-line UPS which provides a solidly reliable source of back-up computing power. It is available for tower design to fit any criticle working environment.\n\nThe PowerWalker VFI LCD series offers capacity with 1000VA und 3000VA depending upon model during full utilization, sufficient capacity in order to bridge smaller power failures and with larger power failures the enterprise keep upright to current generators started. Owing to on-line technology, with which the current flows permanently by the UPS, no losses for switching times develop. If you do not use current generators, then the UPS is by the provided software naturally able your servers to drive duly down before the batteries are empty. Here it is to be configured to you possible for each attached computer an individual profile.\n\nTrue Double Conversion Technologie: Guarantees that attached devices are protected against overvoltages and fluctuations from electricity mains at any time. Output power Factor 0.8: Compared to the online UPS in the current market, this series provides better output power factor up to 0.8. It offers higher performance and efficiency for critical applications. Programmable power management outlets: Users can easily and independently control load segments. During power failure this feature enables users to extend battery time to mission critical devices by shutting down the non critical divices. 50/60Hz frequency converter mode: Lock output frequency at 50Hz or 60Hz to suit power sensitive equipments. ECO mode operation for energy saving: Offers efficiency as high as 97% to cut energy usage and cost. UPS power application via static bypass, timely returning to online double conversion when the need arises. Emergency power off (EPO) function: This feature can secure the personnel and equipment in case of fire or other emergencies. USB and RS-232 communication, SNMP optional: This feature allows either USB or RS-232 communication port to work with SNMP interface simultaneously. External maintenance bypass switch optional: External bypass assures continous power to critical divices during UPS maintenance.\n\n- True Double Conversion Technology;\n- Pure Sine Wave Output On-Line Design;\n- Output power factor 0.8;\n- Programmable power management outlets;\n- 50/60Hz Frequency Converter Mode;\n- ECO Mode operation for energy saving;\n- Emergency Power Off (EPO) Function;\n- USB and RS-232 communication, SNMP optional;\n- External maintenance bypass switch optional.