Data transmission
| Number of trunks |
4 |
| Number of VLANs |
32 |
| MAC address table |
4000 entries |
| Supported data transfer rates |
10/100 Mbps |
| Switching capacity |
8.8 Gbit/s |
| Maximum data transfer rate |
1 Gbit/s |
Networking
| Auto MDI/MDI-X |
Y |
| Flow control support |
Y |
| DHCP client |
Y |
| Rate limiting |
Y |
| Port mirroring |
Y |
| Broadcast storm control |
Y |
| 10G support |
N |
| Full duplex |
Y |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity |
24 |
| Copper ethernet cabling technology |
100BASE-T, 10BASE-T |
| SFP module slots quantity |
2 |
| SFP/SFP+ slots quantity |
2 |
Other features
| Input frequency |
50/60 Hz |
| Power LED |
Y |
| Wi-Fi |
N |
| Networking features |
Gigabit Ethernet |
Management features
| Quality of Service (QoS) support |
Y |
| Web-based management |
Y |
| Multicast support |
Y |
Performance
| Firmware upgradeable |
Y |
| Internal memory |
0.3 MB |
| Flash memory |
0.5 MB |
| Stackable |
N |
Power
| Number of power supply units |
1 |
| Input voltage |
100 - 240 V |
| Input current |
0.8 A |
Protocols
| Supported network protocols |
IPv4, CSMA/CD |
Operational conditions
| Operating temperature (T-T) |
32 - 113 °F |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
N |
Additionally
| Wireless technologies |
Wired |
Ether-FSH2422W, 1U, Gigabit Ethernet, 24 x 10/100/1000BASE-T(X), 4 x Mini-GBIC, MDI/MDI-X, VLAN, DHCP, QoS, L2/3, 17.4W, 1.34kg, Black
24 + 2-port Mixed Gigabit Web Management Switch
- 24 x 10/100Mbps RJ-45 + 2 x 10/100/1000Base-T Ports;
- 26 ports can be used totally;
- 2 x Mini-GBIC slots for optional Mini-GBIC Gigabit Fiber Transceivers;
- Port-Base and Tag VLAN, QoS, Trunking and Port Mirror;
- Web Base Management and Firmware upgrade;
- 8.8Gbps throughput and Auto-MDI/MDI-X;
- Broadcast storm control and Rate Control.
The Ether-FSH2422W can fill the gap between unmanaged and fully managed switches. It is designed for growing businesses that want control over their network without the cost and complexity of a full Layer 2/Layer 3 management implementation. AirLive Ether-FSH2422W, with built-in Gigabit ports, easily connects to servers or a Gigabit-speed backbone for a non-stop 10/100/1000-enabled network that can quickly deliver large multimedia, image and video files. The Ether-FSH2422W has 24-port 10/100Base-T, 2-port 10/100/1000Base-T and SFP slots for optional fiber connectivity, growing business networks, classrooms and workgroups which benefit from superior performance and keep up with expanding network needs. This high-performance switch features nonblocking wire-speed architecture with an 8.8Gbps switching capacity for maximum data throughput. In addition, Ether-FSH2422W have Web-browser interface that offers the simple Smart Switch management, configure ports, even set up port trunks, QoS, Rate control, Port base VLAN and broadcast storm filter. The AirLive Ether-FSH2422W is ideal for adding basic management to your unmanaged networks and extending your managed networks.
Remote Management
The Ether-FSH2422W allows users to configure the switch through local LAN or over the Internet from web browser.
Tag Based VLAN
Unlike ordinary web management switch that has only rudimentary port settings function. The Ether- FSH2422W equipped with some very useful and advance management features. Tag based VLAN allow administrators to configure VLAN groups across different switches. Private VID function is supported to allow switches to write tag information into the packet. Defining complex VLAN function across the entire networks has become much easier.
Rate Control, Trunking, Broadcast/Multicast filter
The data rate control allows limiting the speed of each port form 32Kbps to 64Mbps (18 levels). This is very useful for internet café or FTTH operator as the broadcast/multicast filter control prevents one single station flooding the network with broadcast packet.
Port Trunk with LACP
Port based Trunking allows combining several ports to multiply the speed of one link. The Ether- FSH2422W support up to 4 trunk port members or 3 trunk groups. The priority allows each port to have 2 priority queues. Finally port mirror is provided to allow MIS to sniff the packet of each port for diagnostic purpose.
