Power
| Input voltage |
5 V |
| Input current |
0.5 A |
System requirements
| Internet connection required |
Y |
| Mac compatibility |
Y |
| Minimum processor |
486 |
Other features
| Networking features |
Ethernet, full-duplex Ethernet, Fast Ethernet, full-duplex Fast Ethernet |
| Link/Act LED |
Y |
Bandwidth
| Full duplex |
Y |
| Supported data transfer rates |
10, 20, 100, 200Mbit/s |
Ports & interfaces
| Host interface |
PCI |
| Internal |
Y |
Additionally
| Wireless technologies |
Wired |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Ethernet LAN connection |
Y |
| Transfer rate (Mbps) |
200 Mbit/s |
Half-Sized PCI Fast Ethernet Adapter, IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
- Microsoft WHQL compliant, automatic installation for Win2000 and WinXP.
- Boot ROM socket for optional remote booting.
- Supports 32-bit PCI Local Bus master for high throughput and low processor utilization.
- Complies with the Ethernet/IEEE 802.3u 100BASE-TX and 10 BASE-T industry standard.
- Plug and Play: Simply insert the card into a PC and it will automatically be configuration by the PC BIOS.
- Supports full-duplex operations, thus doubles the network speed up to 20Mbps at 10BASE-T Ethernet or 200Mbps at 100BASE-TX Fast Ethernet. Furthermore, the flow-control technology minimizes packet fragments when buffer is full.
- Support 802.1p COS.
- Single LED indicators to report network status.
- One RJ-45 connector with Auto-sense of cable type of 10 or 100Mpbs network operation.
- Supports wide PCI clock speed from 16.75 to 40 MHz, capable of zero wait state.
- Extensive use of VLSI component that integrated Fast Ethernet MAC, Physical chip and transceiver in one chip to provide high hardware reliability, small power consumption and reduced network interface card size.
- Provides a comprehensive setup program for displaying the adapter configuration, and including diagnostics on board or on network test.
