Data transmission
| MAC address table |
1000 entries |
| Supported data transfer rates |
10/100 Mbps |
| Switching capacity |
3.2 Gbit/s |
| Maximum data transfer rate |
0.1 Gbit/s |
Networking
| Auto MDI/MDI-X |
Y |
| Flow control support |
Y |
| 10G support |
N |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity |
16 |
| DC-in jack |
Y |
| Copper ethernet cabling technology |
100BASE-TX, 10BASE-T |
Performance
| Packet buffer memory |
1.25 MB |
| Stackable |
Y |
Other features
| Power LED |
Y |
| Networking features |
Fast Ethernet |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
Y |
POE-FSH1608 - 16-port Fast Ethernet Switch with 8-Port PoE, Auto MDI/MDI-X, 10/100Mbps Fast Ethernet
The POE-FSH1608 is a powerful, high performance 16-port Fast Ethernet Switch with 8 PoE ports. This switch integrates 100Mbps Fast Ethernet switch and 10Mbps Ethernet network capabilities in highly flexible package.
Power over Ethernet
Power over Ethernet (PoE) is the ability for wired Local Area Networks to allow the electrical current necessary for the operation of each device, to be carried by the data cables rather than by power cords. Port 1 ~ 8 of POE-FSH1608 support PoE which supplies power for connected devices via Cat5 and above cables. By integration of data transmitting cable and power cord, it eliminates the effort constructing your network. It will auto detect the presence of an IEEE802.3af compliant power device (PD) and supply power through the port. The switch provides up 15.4W per PoE port and can be used to power AP, IP phone, IP Cam and other PD devices. Over current protection and short-circuit protection are also supported to ensure the safety.
Plug and Play
The Switch is plug-and-play without any software to configure and also fully compliant with all kinds of network protocols. The LED indicators on the front panel would help user to diagnose status of individual port and system.