Ports & interfaces
Output interface |
BNC |
Host interface |
BNC |
IO XT
<b>Harness the power of Thunderbolt</b>
Turn your Thunderbolt™ - enabled Mac or PC into a professional editing station for HD and SD 4:2:2 and 4:4:4 workflows.
Video Formats
- 525i 29.97
- 525i 23.98
- 625i 25
- 720P 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- 1080i 25, 29.97, 30
- 1080PsF 23.98, 24, 25, 29.97, 30
- 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- 2Kx1080p 23.98, 24, 25
- 2Kx1080PsF 23.98, 24, 25
<b>Software-dependent Formats</b>
720P 23.98, 24 , 25 , 29.97, 30
<b>Video Input</b>
- 3G-SDI, SMPTE-259/292/296/424, 10-bits
- Single Link 4:2:2 or 4:4:4 (1 x 3G BNC)
- dual link HD 4:4:4, (2 x BNC)
- HDMI v1.3
- 1D LUT Support (Mac and PC)
<b>Video Output Digital</b>
- 3G-SDI, SMPTE-259/292/296/424
- Single link 4:2:2 or 4:4:4 (1 x BNC)
- dual link HD 4:4:4, (2 x BNC)
- HDMI v1.4, 30/36 bits/pixel, RGB or YUV, 2.25Gbps
<b>Video Output Analog</b>
- Composite/S-Video (Y/C) (1 x BNC/2x BNC+adapter)
- NTSC, NTSCJ, PAL
- Component (3 x BNC)
- HD: YPbPr, RGB
- SD: YPbPr, RGB (component mode)
- SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
- 12-bit D/A, 8x oversampling
- +/- .2 dB to 5.0 MHz Y Frequency Response
- +/- .2 dB to 1 MHz C Frequency Response
- .5% 2T pulse response
- <1% Diff Phase
- <1% Diff Gain
- <1 ns Y/C delay inequity
<b>Audio Input Digital</b>
16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous
8-channel, 24-bit HDMI embedded audio, 48kHz sample rate, Synchronous
<b>Audio Output Digital</b>
16-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous
8-channel, 24-bit HDMI embedded audio, 48kHz sample rate, Synchronous
<b>Audio Output Analog</b>
- 8-channel, 24-bit D/A analog audio, 48kHz sample rate, balanced, using industry-standard 8 x XLR on DB-25 breakout cable (Breakout cable NOT included)
- +24dbu Full Scale Digital (0dbFS)
- +/- 0.2db 20 to 20kHz Frequency Response
<b>Downstream Keyer</b>
Supports graphics with alpha channel over video, matte or framebuffer, or framebuffer content over incoming video or matte.
<b>Up-Conversion</b>
- Hardware 10-bit
- Anamorphic: full-screen
- Pillar box 4:3: results in a 4:3 image in center of screen with black sidebars
- Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
- Zoom Letterbox: results in image zoomed to fill full screen
- Zoom Wide: results in a combination of zoom and horizontal stretch to fill a 16:9 screen; this setting can introduce a small aspect ratio change
<b>Down-conversion</b>
- Hardware 10-bit
- Anamorphic: full-screen
- Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved
- Crop: image is cropped to fit new screen size
-
<b>Cross-conversion</b>
- Hardware 10-bit
- 1080i to 720P
- 720P to 1080i
- 720P to 1080PsF
<b>SD to SD aspect ratio conversion</b>
- Letterbox: This transforms SD anamorphic material to a letterboxed image
- H Crop: Will produce a horizontally stretched effect on the image; transforms anamorphic SD to full frame
- SD Pillarbox: Will produce an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center
V Crop: Will transform SD letterbox material to an anamorphic image
Reference Input or LTC Input
- 1 BNC assignable to Reference video or LTC input
- Reference:
- Analog Color Black (1V) or Composite Sync (2 or 4V)
- Non terminating