Performance
| Maximum transfer distance |
2000 m |
| Wavelength |
1310 nm |
Additionally
| Wireless technologies |
Wired |
AT-MC102XL-20 - TX to FX Fast Ethernet media converter with multi-mode SC fiber connectors
Fiber Connections
The Allied Telesis range of Fast Ethernet media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting both SC and ST fiber connectors, these converters can be used to extend networks with up to 2km of multi-mode fiber or 40km of single-mode fiber.
Auto-Negotiation and MissingLink™
The MissingLink feature enables the fiber optic ports on the media converter to pass the ‘Link’
status of their connections to each other. When the media converter detects a problem with
one of the ports, such as the loss of connection to an end-node, the media converter shuts
down the connection to the other port, thus notifying the node that the connection has been
lost.
Simple Installation
All the media converters feature auto MDI/MDI-X, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of fiber connection, by forcing the converters to communicate over the fiber cable. This ‘Link Test’ feature allows installers to check for cable faults without the need for expensive fiber optic test equipment.
Standalone or Rack-mounted
Each small media converter is powered by an external power supply unit for use in standalone
applications. Where multiple media converters are being used, up to 12 standalone devices can
be inserted into a low-cost rack-mount chassis, allowing all the converters to be powered by a
single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis.
Hassle Free Support
Allied Telesis Fast Ethernet media converters offer free technical support, ensuring troublefree
installation.
