Management features
Multicast support |
Y |
System event log |
Y |
Quality of Service (QoS) support |
Y |
Web-based management |
Y |
Data transmission
MAC address table |
64000 entries |
Switching capacity |
136 Gbit/s |
Number of trunks |
26 |
Packet forwarding rate (1 Gbps) |
1488000 pps |
Packet forwarding rate (10 Mbps) |
14880 pps |
Packet forwarding rate (100 Mbps) |
148800 pps |
Number of queues |
8 |
Networking
Private VLAN |
Y |
Port mirroring |
Y |
Broadcast storm control |
Y |
VLAN support |
Y |
IGMP snooping |
Y |
Rate limiting |
Y |
Link aggregation |
Y |
Spanning tree protocol |
Y |
Port-based VLAN |
Y |
Protocol-based VLAN |
Y |
Flow control support |
Y |
DHCP client |
Y |
10G support |
Y |
Full duplex |
Y |
Ports & interfaces
Installed SFP+ modules quantity |
2 |
Basic switching RJ-45 Ethernet ports quantity |
48 |
Basic switching RJ-45 Ethernet ports type |
10G Ethernet (100/1000/10000) |
Design
Ventilation fan(s) |
3 |
Form factor |
19U |
Rack mounting |
Y |
Security
MAC address filtering |
Y |
Access Control List (ACL) |
Y |
Power over Ethernet (PoE)
Power over Ethernet (PoE) |
N |
ALL-SG8950M / full managed Layer2+ 48 Port Gigabit +
- 48-Port Gigabit Copper + 2x 10 Gigabit SFP+ Ports
- 802.3az Energy Effi cient Ethernet
- 136G Non-Blocking Switching Capability
- Layer 2+ Full Managed Software Features
- 4K VLAN, 8 queues QoS, Advanced VLANs
- MSTP, LACP, LLDP, sFlow
- 802.1X, RADIUS, TACAS+, ACL
- IPv6, IPv4/v6 Multicast Filtering
Introduction
The switch is 48-port 10/100/1000Base-T + 2 10 Gigabit SFP+ Ports Rack-mount L2+ Full Management Network Switch that is designed for medium or large network environment to strengthen its network connection. The switch supports 136G non-blocking switch fabric, the 48 gigabit ports and 2 10G uplink ports can transmit and receive data traf c without any lost. The EEE feature reduces the power consumption when there is no traf c forwarding even port is still connected. The switch also supports Layer 2+ full management software features. These features are powerful to provide network control, management, monitor and security feature requests. Including rack-mount brackets, the 19“ size ts into your rack environment. It is a superb choice to boost your network with better performance and efficiency.
2x 10G Gigabit SFP+ Open Slots
The switch equips with 2 10G SFP+ open slots as the uplink ports, the 10G uplink design provides an excellent solution for expanding your network from 1G to 10G. By 10G speed, this product provides high flexibility and high bandwidth connectivity to another 10G switch or the Servers, Workstations and other attached devices which support 10G interfaces. The user can also aggregate the 10G ports as Trunk group to enlarge the bandwidth.
Advanced Security
The switch supports advanced security features. For switch management, there are secured HTTPS and SSH, the login password, configuration packets are secured. The port binding allows to bind specific MAC address to the port, only the MAC has the privilege to access the network. The 802.1X port based Access Control, every user should be authorized first when they want to access the network. AAA is the short of the Authentication, Authorization and Accounting with RADIUS, TACAS+ server. Layer 2+ Access Control List allows user to de ne the access privilege based on IP, MAC, Port number, and etc.
Full Layer 2+ Management Features
The switch includes full Layer 2+ Management features. The software set includes up to 4K 802.1Q VLAN and advanced Protocol VLAN, Private VLAN, MVR…features. There are 8 physical queues Quality of Service, IPv4/v6 Multicast Filtering, Rapid Spanning Tree protocol to avoid network loop, Multiple Spanning Tree Protocol to integrate VLAN and Spanning Tree, LACP, LLDP; sFlow, port mirroring, cable diagnostic and advanced Network Security features. It also provides Console CLI for out of band management and SNMP, Web GUI for in band Management.