Design
| DIN rail mounting |
Y |
| Internal |
N |
Networking
| Cable types supported |
Cat6, Cat5e, Cat5 |
| Flow control support |
Y |
| Jumbo frames |
9000 |
| Duplex system |
Half, Full |
| Ethernet LAN data rates |
10, 100, 1000 Mbit/s |
Power
| Power over Ethernet (PoE) |
Y |
| Total Power over Ethernet (PoE) budget |
72 W |
Performance
| Fiber cable diameters supported |
62.5/125, 50/125, 9/125 µm |
| Buffer size |
1000 KB |
| Maximum transfer distance |
550 m |
| Fiber mode structure |
Single-mode, Multi-mode |
Additionally
| Transfer rate (Mbps) |
1000 Mbit/s |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Jumbo Frames support |
Y |
1x 10/100/1000BaseT RJ-45, 1x 1000BaseSX/LX SFP, PoE, 4-pin Terminal Block, IP30, 103.5 x 32 x 81 mm
This Rugged 60 Watts Industrial POE converter is designed with hardened Marvell IC, it delivers 60Watts POE power to your PD. It also can tolerate extreme temperature in a harsh environment. Our ColdDesign technology will not only power up your PD device, also reduce the excessive heat problem to a minimum. It accepts the input voltage from 48VDC to 56VDC to meet IEEE802.3af/at required voltage. It is being rigorously tested for your Security, Transportation and Telco application.