Data transmission
| MAC address table |
1000 entries |
| Store-and-forward |
Y |
| Switching capacity |
8 Gbit/s |
Ports & interfaces
| Console port |
DB-25 |
| CX4 ports quantity |
1 |
| Basic switching RJ-45 Ethernet ports quantity |
5 |
| Copper ethernet cabling technology |
100BASE-TX, 1000BASE-TX, 10BASE-T |
| Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000) |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) power per port |
15.4 W |
| Total Power over Ethernet (PoE) budget |
60 W |
| Power over Ethernet (PoE) |
Y |
| Power over Ethernet (PoE) ports quantity |
4 |
Networking
| Flow control support |
Y |
| Cable types supported |
Cat5 |
| 10G support |
N |
| Full duplex |
Y |
Power
| Power supply included |
Y |
| Input voltage |
48 V |
| Input current |
1.25 A |
Design
| Rack mounting |
Y |
| Wall mountable |
Y |
5 Port 10/100/1000 Desktop Switch, 4 x 10/100/1000 PoE 802.3af, 1xGIG Uplink
Designed for use with Power over Ethernet (PoE) devices, the SG4P1 switch provides up to 15.4W of power to 802.3af PoE compatible devices connected to the switch’s PoE ports. The Switch allows these devices to draw power from the switch and remove the need for a power adapter. Some devices that may have support for 802.3af are Wireless Access Points, IP Phones and IP Cameras. The Switch’s ports automatically negotiate between
10BASE-T and 100BASE-TX network speeds, as well as between full and half duplex modes, so any port can connect to a Fast Ethernet or Ethernet network. The ports also support Auto MDIX, allowing the automatic detection of a straight through or cross-over cable, this feature reduces support problems commonly caused by incorrect cable usage.