Performance
| Noise level |
40 dB |
| Audible alarm(s) |
Y |
| Surge protection features |
Fax, Modem, Network, Telephone |
Power
| Input operation voltage (max) |
278 V |
| Input operation voltage (min) |
160 V |
| Maximum current |
10 A |
| Power supply input frequency |
50/60 Hz |
| Surge energy rating |
310 J |
| Output power capacity |
700 VA |
| Output power |
405 W |
Ports & interfaces
| Modem (RJ-11) ports |
1 |
| AC outlets quantity |
8 AC outlet(s) |
Battery
| Hot-swap battery |
Y |
| Battery recharge time |
16 h |
| Typical backup time at half load |
13 min |
| Typical backup time at full load |
3 min |
| Replacement battery cartridge |
RBC17 |
| Cold start |
Y |
| Number of batteries supported |
1 |
Operational conditions
| Non-operating altitude |
0 - 9000 m |
| Operating altitude |
0 - 9000 m |
Other features
| Nominal input voltage |
230 V |
| Nominal output voltage |
230 V |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
Back-UPS 700VA, 405W, 230V, 8x Schuko CEE 7, RJ-45, 6.93kg
BE700G-RS Features
- Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
- Cold-start capable
Provides temporary battery power when the utility power is out.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Audible alarms
Provides notification of changing utility power and UPS power conditions
- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- USB connectivity
Provides management of the UPS via a USB port (not available on all models).
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Protection
- Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
- Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Availability
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Serviceability
- Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Manageability
- Audible alarms
Provides notification of changing utility power and UPS power conditions
- LED status display
Quickly understand unit and power status with visual indicators.
Safety
- Safety-agency approved
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
