Performance
| Noise level |
45 dB |
| Audible alarm(s) |
Y |
| Surge protection features |
Fax, Modem, Telephone |
Power
| Input operation voltage (max) |
280 V |
| Input operation voltage (min) |
150 V |
| Efficiency |
96% |
| Maximum current |
3 A |
| Power supply input frequency |
50/60 Hz |
| Surge energy rating |
273 J |
| Output power capacity |
800 VA |
| Output power |
480 W |
Ports & interfaces
| Modem (RJ-11) ports |
2 |
| AC outlets quantity |
4 AC outlet(s) |
Operational conditions
| Non-operating altitude |
0 - 9000 m |
| Operating altitude |
0 - 3000 m |
Battery
| Typical backup time at half load |
7.2 min |
| Typical backup time at full load |
0.6 min |
| Replacement battery cartridge |
RBC17 |
| Cold start |
Y |
| Number of batteries supported |
1 |
Other features
| Nominal input voltage |
230 V |
| Nominal output voltage |
230 V |
Back-UPS 800VA, 480W, 230V, 4x Schuko CEE 7, USB, RJ-11, 8kg
BX800CI-RS Features
- Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
- Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
- Replace Battery LED
An external Replace Battery LED informs the end-user that the battery needs to be replaced.
- Cold-start capable
Provides temporary battery power when the utility power is out.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
- Audible alarms
Provides notification of changing utility power and UPS power conditions
- USB connectivity
Provides management of the UPS via a USB port (not available on all models).
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Protection
- Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
- Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Availability
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Serviceability
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Manageability
- Audible alarms
Provides notification of changing utility power and UPS power conditions
- LED status display
Quickly understand unit and power status with visual indicators.
Safety
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
