Performance
| Noise level |
45 dB |
| Waveform |
Sine |
| Auto-restart |
Y |
| Audible alarm(s) |
Y |
| UPS topology |
Line-Interactive |
| Automatic Voltage Regulation (AVR) |
Y |
| Hold time (max) |
2 ms |
Power
| Input operation voltage (max) |
302 V |
| Input operation voltage (min) |
151 V |
| Efficiency |
97.9% |
| Power supply input frequency |
50/60 Hz |
| Surge energy rating |
365 J |
| Output power capacity |
2200 VA |
| Output power |
1980 W |
Technical details
| Input connections |
IEC-320 C20, Schuko CEE 7 / EU1-16P, BS1363A |
Packaging content
| Software CD |
Y |
| Quick installation guide |
Y |
Battery
| Battery capacity |
783 VAh |
| Hot-swap battery |
Y |
| Battery recharge time |
3 h |
| Typical backup time at half load |
25 min |
| Typical backup time at full load |
8.7 min |
| Replacement battery cartridge |
RBC55 |
| Cold start |
Y |
| Automatic battery test |
Y |
| Battery life (max) |
5 year(s) |
Operational conditions
| Non-operating altitude |
0 - 15000 m |
| Operating altitude |
0 - 3000 m |
Ports & interfaces
| Number of output IEC jumpers |
2 |
| AC outlets quantity |
9 AC outlet(s) |
| SmartSlot |
Y |
Other features
| Nominal input voltage |
230 V |
| Nominal output voltage |
230 V |
Smart-UPS 2200VA LCD 230V
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Sequenced shutdown and restart
Configure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
StruxureWare Central compatible
Enables centralized management via StruxureWare Central.
