Performance
| Rotational speed (max) |
1350 RPM |
| Type |
Cooler |
| Fan diameter |
120 mm |
| Supported processor sockets |
LGA 2011-v3 (Socket R), LGA 1151 (Socket H4) |
| Number of heat pipes |
4 |
| Heat pipes diameter |
6 mm |
| Thermal Design Power (TDP) |
150 W |
| Pulse-width modulation (PWM) support |
Y |
| Suitable for |
Processor |
| Number of fans |
2 fan(s) |
Power
| Rated current |
0.2 A |
| Voltage |
12 V |
2x 120 mm, 0-1350 RPM, PWM, 12 V DC, 0.2 A, 123 x 150 x 102 mm, 752 g
Additional Fan for More Cooling Capacity
Two low noise F12 PWM fans mounted on opposite sides of the radiator provide a great airflow. The first fan pushes air through the heatsink, the second fan pulls the air out of the heatsink.
Performance Champ
The Freezer i32 Plus is based on the ARCTIC Freezer i30, but features several improvements that boost performance and further reduce noise. Thanks to the award winning cooling performance, the Freezer i32 Plus is the perfect gadget for PC enthusiasts looking for an affordable solution for the CPU cooling.
Semi Passive Cooling
By semi passive performance the Freezer i32 Plus provides again a special feature. A sophisticated fan controller that was developed by German engineers enables the CPU to be cooled completely passively during typical Windows operation. The F12 PWM fans only start up at a higher load (starting at 40 % PWM).
Improved Heat Dissipation
As a new feature, the Freezer i32 Plus has off-centered heat pipes that dispense the heat better than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow and circulate it around the heatpipes.
Optimal Compatibility
Fast and easy to install and extremely reliable, the mounting system is compatible with all current Intel sockets. Also, the low footprint of the Freezer i32 Plus avoids interference with the RAM, even if there are two fans used ensuring the best compatibility.
Enhanced Bearing
Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced and a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise and you can enjoy a longer service life of your cooler.
Easy Installation & Transport Safe
Thanks to the screw-mount onto a back-plate and a significantly lower weight compared to the i30, the Freezer i32 Plus is not only fool-proof to install, but also absolutely transport safe.
