Shine & Care Kit for iPod video
Shine & Care Kit is the 2-Step cure to make your iPod shine and stay shining. The Artwizz polishing creme removes most scratches. Just squeeze a bit of the polishing creme onto the scratched area, rub with the included cleaning cloth, and your iPod regains ist former shine. Once the iPod is shining, apply the ScratchStopper protective films to protect your iPod against grime and scratches for the future.
Applying Artwizz polish creme
In order to protect the Click-Wheel from getting remnants of the polish creme, cover it with the rounded film. Clean the surface of the iPod with the yellow microfibre cloth. Before applying the creme, make sure that no dust or sand-corns are on the iPod. Apply a small amount of Artwizz polishing creme. Using the white polishing cloth, rub the scratched area for 2-3 minutes evenly. You may re-polish if necessary, especially with deeper scratches. Remove the Click-Wheel cover film and ensure that no polishing creme remains on the surface of the iPod.
Attaching the Artwizz ScratchStopper
Pull off one corner of the lower carrier foil (A) without touching the static underside of the Scratchstopper foil. Now position the open corner on the surface of the iPod.
Completely pull off the lower carrier foil (A) and firmly rub down the ScratchStopper foil at the same time.
Pull off the upper carrier foil (B). Wipe away any air bubbles which arise.
Directions for washing
If the film has become too greasy, remove it, and with the static side face down, rinse it under a water faucet. Gently rub the film using a mild soap until the surface is clean. Rinse again. Dry the film with a dust-free cloth and wait until the film is completely dry. Now re-apply the film.
Content:
1x microfiber cloth;
1x clean + polish cloth;
1x Artwizz polish creme;
1x coverfilm for the Click Wheel;
1x protective film for the front surface;
1x protective film for the back surface.
