Performance
PTZ control (Pan/Tilt/Zoom) |
N |
Night vision
Number of illumination LEDs |
28 |
Night vision |
Y |
LED type |
IR |
Infra-red wavelength |
850 nm |
Night vision distance |
12 m |
Video
Frame rate |
100 fps |
NTSC resolutions |
537 x 505 pixels |
Number of TV lines |
420 |
PAL resolutions |
537 x 597 pixels |
System requirements
Minimum graphics adapter memory |
64 MB |
Minimum processor |
Pentium 4 1800MHz |
Packaging content
Handheld remote control |
Y |
Camera
Camera shutter speed |
1/50 - 1/100000 s |
Networking
Supported network protocols |
TCP/IP, DHCP, DDNS, PPPoE |
Wi-Fi |
N |
Power
Power over Ethernet (PoE) |
Y |
Additionally
Ethernet LAN (RJ-45) ports quantity |
4 |
Ethernet LAN connection |
Y |
Wireless technologies |
Wired |
A02-ACAM2KIT-W - 4 Channel H.264 Standalone DVR with 4 IR Cameras Videosurveillance Kit
NetCamera Ethernet System is a complete solution (with standalone DVR and 4 IR Cameras) for local/remote video surveillance, designed to operate in every working environment (domestic or SoHo). DVR is able to playback locally, on the connected monitor (VGA), up to 4 channels and is able to record (always, motion detection, manual, time schedule) on the internal 2,5” HDD, using H.264 codec. The CCD sensor (1/3”), able to work also with a low light intensity of the environment, provides clear and tidy videos with real colors in each situation (24 IR LEDs down to 0 Lux up to 8 mt). NetCamera uses ethernet cables for the connection to cameras (power and video/audio are integrated onto the same cable, supporting category 5/5e up to 100 Meters) it allows to migrate in the future the infrastructure toward IP, without further costs of wiring, safeguarding the investment. Finally, it can be remotely managed and controlled at any moment and place, in a simply and intuitive way, via PC or notebook connected to the Internet (or Intranet) by using any web browser or mobile devices (iPhone or iPad). These features make NetCamera Ethernet System the ideal tool for local/remote monitoring/video surveillance.
NetCamera Ethernet System 2 Kit is a complete solution (with standalone DVR and 4 IR Cameras) for local/remote video surveillance, designed to operate in every working environment (domestic or SoHo). Included: DRV 4ch, 4 x Cameras (24 IR Led), 4 x Balun, Remote control and Mouse. NetCamera uses ethernet cables for the connection to cameras (power and video/audio are integrated onto the same cable, supporting category 5/5e up to 100 Meters) it allows to migrate in the future the infrastructure toward IP, without further costs of wiring, safeguarding the investment. Finally, it can be remotely managed and controlled at any moment and place, in a simply and intuitive way, via PC or notebook connected to the Internet (or Intranet) by using any web browser or mobile devices (iPhone or iPad). These features make Camera System the ideal tool for local/remote monitoring/video surveillance.
- 4 Channel Network DVR (standalone Linux 2.6 OS) with LAN interface
- 4 x 1/3” CCD IR Cameras (24LED)
- Suppport VGA Output (Max. Resolution: 1280 x 1024)
- Vesa mounting compliant
- NetCamera uses ethernet cables for the connection to cameras (power and video/audio are integrated onto the same cable, supporting category 5/5e up to 100 meters) it allows to migrate in the future the infrastructure toward IP, without further costs of wiring, safeguarding the investment
- Up to 750GB Internal SATA 2,5” HDDs
- Video Compression Frame: H.264
- Mobile Phone remote surveillance (iPhone & iPad)
- Alarm modes: Motion Detection, Video Loss, HDD Full & HDD Loss
- OSD in English