Technical details
| Video port type |
HDMI |
| Rack mounting |
Y |
| Full HD |
Y |
| External power adapter |
Y |
| HDMI ports quantity |
4 |
| HDCP |
Y |
Ports & interfaces
| DC-in jack |
Y |
| VGA (D-Sub) ports quantity |
1 |
| HDMI in |
3 |
Packaging content
| Handheld remote control |
Y |
Additionally
| AC adapter bundled |
Y |
| RS-232 port |
1 |
10-input Switcher / Scan Converter with Single HDMI Output with 3D Support
The Atlona AT-HD600 is a 10-input switcher with a single HDMI output. The Atlona switcher is able to switch and convert any of the 2 x composite, 2 x S-Video, 2 x component video, 1 x VGA and 3 x HDMI to a single HDMI output. The HD600 can be controlled through IR remote or RS232
<b>Features:</b>
- 3D Capable
- Converter/Switcher is fully HDCP compliant
- Deep Color video up to 36bit, 1080p@(24/60)Hz.
- 10-inputs: 2 x composite, 2 x S-Video, 2 x component video, 1 x VGA and 3 x HDMI inputs
- Audio signal for every input gets embedded on to the HDMI output along with Video
- Audio delay for 150ms, allows users to make sure that Audio and Video signals are in sync
- Supports a wide range of PC and HDTV resolutions from VGA to SXGA@75Hz and 480i to 1080p.
- 3D comb filter helps increasing image quality on analog sources by processing three consecutive horizontal scan lines
- 3D noise reduction (DNR), will clear analog source signal from most of the artifacts and video noise
- Multi-Standard Video Signal Compatibility - PAL & NTSC (3.58/4.43)
- Supports format converter from 480i/576i to 480p/576p
- IR remote control, IR codes are available for users who would like to program it into the different control system
- RS-232 control, RS232 codes are available for controlling the switcher from computer or a separate control system
- Comes with Rack Mounts
