Security
| Active tampering alarm |
Y |
| Video motion detection |
Y |
Audio
| Audio detection |
Y |
| Sample rate |
16 kHz |
| Built-in microphone |
Y |
Image sensor
| Optical sensor size |
1/4 " |
| Sensor type |
CMOS |
Storage
| Internal memory |
128 MB |
| Flash memory |
128 MB |
Camera
| Camera shutter speed |
1/24500 - 1/6 s |
| Minimum illumination |
0.9 lx |
| Pan range |
0 - 360 ° |
| Tilt angle |
0 - 170 ° |
Power
| Power over Ethernet (PoE) |
Y |
Networking
| Supported network protocols |
IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
Lens system
| Focal length range (f-f) |
2.8 - 10 mm |
P3304 - 10-Pack, Multiple H.264 streams, 0.9 lux F1.7, 1280x800 to 160x90, 30 fps, Power over Ethernet IEEE 802.3af Class 2
High-performance compression and streaming capabilities
AXIS P3304 offers superior image quality including progressive scan and wide dynamic range, providing crisp and clear images of both illuminated and low-light areas. In addition, AXIS P3304 provides HDTV 720p/1 megapixel resolution at full frame rate. Multiple H.264 streams, as well as Motion JPEG streams, can be provided simultaneously either in full frame rate or individually optimized for different quality needs and bandwidth constraints.
Professional video surveillance
AXIS P3304, with its tamper resistant casing, is a fixed dome specifically adapted for unobtrusive video surveillance in exposed indoor environments, where discreet and compact solutions are required. It is the perfect solution for video surveillance systems with quality and efficiency requirements, e.g. in retail stores, government, banks and airports segments.
Powerful event capabilities
The AXIS P3304 also supports a number of advanced features that give the camera increased flexibility and capabilities, including enhanced video motion detection, audio detection and detection of camera tampering attempts like blocking or spray-painting. Inputs/outputs allow the camera to connect external devices such as door sensors and relays to activate light or close doors. Power over Ethernet supplies power to the camera via the network, eliminating the need for power cables and reducing installation costs.
